SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Cam chain
/cgi-bin/YaBB.pl?num=1070170288

Message started by AL_DOWN_UNDER on 11/29/03 at 21:31:28

Title: Cam chain
Post by AL_DOWN_UNDER on 11/29/03 at 21:31:28

Can any one tell me if you have to remove the clutch hub when replacing the cam chain.  >:(

Title: Re: Cam chain
Post by IronRebel on 02/01/04 at 13:06:39

No, you do not have to remove the clutch basket.  

Title: Re: Cam chain
Post by Kropatchek on 02/02/04 at 08:38:25

Just remove the primairy gear. Leave the clutch gear inplace to help you with unscrewing the primary gear. The nut has LEFT HAND thread.

Title: Re: Cam chain
Post by AL_DOWN_UNDER on 02/05/04 at 23:47:34

THANKS FOR THE INFO AND HELP . IRON REBEL , KROPATCHEK , MAY THE FORCE BE WITH YOU. AL

Title: Re: Cam chain
Post by reggae.iceman on 03/03/04 at 11:38:15

to lock the motor place a copper washer between the cogs before undoing. or else.....take care now.

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.