SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Get any parts you need machined!
/cgi-bin/YaBB.pl?num=1094794475

Message started by PRH111 on 09/09/04 at 22:34:35

Title: Get any parts you need machined!
Post by PRH111 on 09/09/04 at 22:34:35

Since the savage/s40 is an entry level bike and they don't make more than the basic items for our bikes there is a place you can utilize to have custom parts made (but you have to do the work of designing the part with the available CAD software).

www.emachineshop.com

Saw this on cnn a few weeks ago and thought it may be of interest or use to someone.

Title: Re: Get any parts you need machined!
Post by Greg_650 on 09/10/04 at 04:39:48

Like a sprocket for your Savage.... :o

http://www.emachineshop.com/images/parts_r1_c2.gif

Title: Re: Get any parts you need machined!
Post by Jennifer on 09/10/04 at 05:29:17

Greg this is great! I have some ideas already just wasn't sure how to do it. I wonder about the cost. I will submit an idea once I download the software. Thanks again.

Title: Re: Get any parts you need machined!
Post by Greg_650 on 09/10/04 at 06:26:47

I didn't know this existed either. Thanks, to the Resident Nerd ::)

Title: Re: Get any parts you need machined!
Post by gitarzan on 09/10/04 at 18:42:35

Wow. Prices drop rapidly with volume.

Title: Re: Get any parts you need machined!
Post by Greg_650 on 09/11/04 at 02:53:44

Hey, Piston Head! Nice icon ;D

Title: Re: Get any parts you need machined!
Post by gitarzan on 09/11/04 at 05:08:44

Thankew. ;D

The site that I was linking my old one from disappeared, leaving me with the little red X .

I found this one and massaged it with a little bit of pbrush and Irfanview:

http://www.muldersmachine.com/img/piston.gif

http://www.muldersmachine.com