SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Bar Size.
/cgi-bin/YaBB.pl?num=1101200099

Message started by Tony on 11/23/04 at 00:54:59

Title: Bar Size.
Post by Tony on 11/23/04 at 00:54:59

Does anyone know the diameter of the new bars that are used on the S40's. I need to install an electrical switch and am looking at the Pingle Button Switch. The switch is to turn on (when needed) a foward facing Blue Strobe.

Title: Re: Bar Size.
Post by Kropatchek on 11/23/04 at 03:59:32

Think it's the same as the Savage : 1"
Greetz
Kropatchek ;D

Title: Re: Bar Size.
Post by Tony on 11/23/04 at 05:02:58

Thank you. Thats what I was hoping. I found the switch but it only come is 1" ID. My only next question is, where would be the best place to pull 12v for powering the strobe? It is a realative low current but i want it to shut down with the ignition. I have been know to leave the light on in my car after ariving at a scene and I dont think that would be a good idea on the bike.

Title: Re: Bar Size.
Post by Kropatchek on 11/23/04 at 08:35:22

The best thing to do is studying the wiring diagram.
Pick-up a wire after ( downstream )the ignition switch.
Greetz
Kropatchek ;D