SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Fabrication people
/cgi-bin/YaBB.pl?num=1110234285
Message started by LondonThing on 03/07/05 at 14:24:45

Title: Fabrication people
Post by LondonThing on 03/07/05 at 14:24:45
Hi, well let me explain, I have no machinary and not an expert fabricator, so if theres somone out there that wants a job, heres one for you... I need a custom swingarm made to fit a car wheel in. Will also need and extended front sprocket made...

Its for this bike http://www.londonthing.net/savage.htm

Cheers,
Chris Fernandes.

Title: Re: Fabrication people
Post by sluggo on 03/07/05 at 14:45:59

LondonThing wrote:
Hi, well let me explain, I have no machinary and not an expert fabricator, so if theres somone out there that wants a job, heres one for you... I need a custom swingarm made to fit a car wheel in. Will also need and extended front sprocket made...

Its for this bike http://www.londonthing.net/savage.htm

Cheers,
Chris Fernandes.


sound like an intresting idea. here's my question

what you be smoking, and can you send some to me please, things have been pretty "dry" around here if you know what i mean.

hey we all don't drink beer. some like the hops older cousin.    :o :o

Title: Re: Fabrication people
Post by LondonThing on 03/07/05 at 16:15:52
Im a shots man myself, Sambuka and such like, dont really do beer/ale... but anyways, u say what am i on... well...WHAT ARE YOU ON?? hehe LOL... I want a car wheel in my savage, love the other one iv seen floating around, but i plan on using a slightly more arched than has been dpne b4 :-)

Title: Re: Fabrication people
Post by gitarzan on 03/07/05 at 16:17:01

Quote:
I want a car wheel in my savage,


What's wrong with good old handlebars?   ???

;D

Title: Re: Fabrication people
Post by sluggo on 03/07/05 at 16:49:28

LondonThing wrote:
Im a shots man myself, Sambuka and such like, dont really do beer/ale... but anyways, u say what am i on... well...WHAT ARE YOU ON?? hehe LOL... I want a car wheel in my savage, love the other one iv seen floating around, but i plan on using a slightly more arched than has been dpne b4 :-)



like i said it would be an intresting mod. would love to see one in action.

you say what am i on, thats the problem, nothing
i'm one of those 60's kids  never have drank.
but if i add it all up i've probably smoked a volvo by now.  :o

Title: Re: Fabrication people
Post by slavy on 03/07/05 at 18:23:32
What do Yoou mean "extended front sprocket"?
Do You mean offset or with bigger diameter.
If You want to do such a changes, I am sure the better solution will be chain drive, so You will be able to play with the swing arm lenght.

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.