|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Front disc pads /cgi-bin/YaBB.pl?num=1112540689 Message started by lancer on 04/02/05 at 10:12:54 |
|
Title: Front disc pads Post by lancer on 04/02/05 at 10:12:54 What are the best pads to use for the front disc? Are OEM the ones to go with or is there an aftermarket supplier that makes a better one? Thanks for the help. |
|
Title: Re: Front disc pads Post by klx650sm2002 on 04/03/05 at 00:49:06 I'd use EBC. Clive W :D |
|
Title: Re: Front disc pads Post by Reelthing on 04/03/05 at 03:55:11 I'm still trying to settle up on that one. When I got the savage it had what I believe were metalic pads that would squeal if you just looked at them and the folks that put them on used nothing on the back of the pads - no grease or blue sticky stuff - I replaced these with organic pads from EBC - they work very well - no squeals and solid single stop performance - on repeative stops I think I feel some fad not bad but there - once these wear down a bit I have some SBS ceramic "street" pads hanging on the wall ready to try out. I understand EBC makes a better performing rotor than the stock one as well - it maybe cross drilled and vented - that sure wouldn't hurt. |
|
Title: Re: Front disc pads Post by Greg_650 on 04/03/05 at 10:11:17 Reelthing wrote:
I use EBC too.... A drilled rotor is a cool idea too (literally).... |
|
Title: Re: Front disc pads Post by Kropatchek on 04/03/05 at 12:50:18 I installed the EBC drilled rotor. Eat up the metalic EBC brakepads within 100KM. Only the stationairy pad. Turned out that the drilled holes had not beed deburred. Don't say I did not warn you. Greetz Kropatchek ;D ;D |
|
Title: Re: Front disc pads Post by Greg_650 on 04/03/05 at 15:02:36 Kropatchek wrote:
Deburred is a good thing. :o |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |