SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> De-Compressor Valve
/cgi-bin/YaBB.pl?num=1113152458

Message started by LondonThing on 04/10/05 at 10:00:58

Title: De-Compressor Valve
Post by LondonThing on 04/10/05 at 10:00:58

Has anyone got detailed diagrams, or good photos of this? It would be a great great help.

And if this is in the wrong catagory the i deserve a spank and i appologise.... dont know if questions should go in here or tech bit... ???

Cheers all :-)

Title: Re: De-Compressor Valve
Post by Savage_Rob on 04/10/05 at 10:16:11

I think this is the right place at this point.  The Technical Corner is really for reference material.  This thread could become one of those documents though.

Title: Re: De-Compressor Valve
Post by Greg_650 on 04/10/05 at 12:30:41


LondonThing wrote:
Has anyone got detailed diagrams, or good photos of this? It would be a great great help.

And if this is in the wrong catagory the i deserve a spank and i appologise.... dont know if questions should go in here or tech bit... ???

Cheers all :-)


You mean the decompression solenoid?  There isn't any valve other than the exhaust valves which the solenoid opens slightly.  It's that big round thing between the turn signal relay and the ignition coil

Title: Re: De-Compressor Valve
Post by LondonThing on 04/10/05 at 12:50:38

Yes thats what i mean,  I just need to see how it all bols together, because i have tried it two different ways, one way it too close and the other its too far away, so if i can see somone elses, then i will know if i have a dodgy... somthing etc...

thanks

Title: Re: De-Compressor Valve
Post by Greg_650 on 04/10/05 at 13:08:22

You mean like this?

Ron Ayers (http://www.ronayers.com/fiche/300_0271/electrical_model_t_v_w_x_y_k1_k2_k3/electrical_model_t_v_w_x_y_k1_k2_k3.bmp)

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.