SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> W/ factory parts can I do drag bar instead of stk?
/cgi-bin/YaBB.pl?num=1115079565

Message started by Tyler on 05/02/05 at 17:19:25

Title: W/ factory parts can I do drag bar instead of stk?
Post by Tyler on 05/02/05 at 17:19:25

I have a 1997 Savage with the pullback bars. I want to change to the straight drag style bar. Bikebandit.com has the full straight bar setup from the 1995 Model Savage. If I buy the bar, with all the cables and stuff, that will work correct?
Here's what I want:

http://houseofmotorcycles.bikebandit.com/partsbandit/oem_schematic_view~mp_id~~mscssid~1PT032GGCUX78NXUL4K3JS0WTLG36F14~schem_dept_id~716721~section_dept_id~1~section_dept_name~OEM+%28Stock%29+Parts~dept_type_id~2~model_dept_year~1995~model_dept_mfr~Suzuki~model_dept_id~703436~model_dept_name~LS650PS+SAVAGE.asp

Here's what I have:

http://houseofmotorcycles.bikebandit.com/partsbandit/oem_schematic_view~mp_id~~mscssid~1PT032GGCUX78NXUL4K3JS0WTLG36F14~schem_dept_id~724171~section_dept_id~1~section_dept_name~OEM+%28Stock%29+Parts~dept_type_id~2~model_dept_year~1995~model_dept_mfr~Suzuki~model_dept_id~703436~model_dept_name~LS650PS+SAVAGE.asp

Title: Re: W/ factory parts can I do drag bar instead of
Post by sluggo on 05/02/05 at 17:25:11

my drag bars came from krome werks and were 50 bucks. the cables now a bit long but still works well. using the stock risers the just clear the tank in a to the stops turn. good luck they work great.

Title: Re: W/ factory parts can I do drag bar instead of
Post by WD on 05/03/05 at 00:09:42

Do it Sluggo's way. Much less expensive, and the buckhorn master cylinder WILL work on pullbacks, contrary to popular belief.
-WD