|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Help with clutch nut removal..... /cgi-bin/YaBB.pl?num=1122913601 Message started by Lil Em on 08/01/05 at 09:26:41 |
|
Title: Help with clutch nut removal..... Post by Lil Em on 08/01/05 at 09:26:41 Okay I don't have an impact driver. The Clmyer manual mentions something about a Honda special tool that holds the clutch pressure plate from turning in order to remove the clutch nut. I've contacted my local Honda dealer but they can't find it in their system with the part # provided in the manual. Any ideas to help me with this issue? Is there another alternative way? Please help. Thanks. |
|
Title: Re: Help with clutch nut removal..... Post by Kropatchek on 08/01/05 at 11:36:31 A copper washer between the primairy gear and the clutch gear will do the trick. Got this from the German workshop manual. Greetz Kropatchek ;D |
|
Title: Re: Help with clutch nut removal..... Post by klx650sm2002 on 08/02/05 at 03:52:59 Like Kropatchek says, I use a penny piece, a cheap special tool. Clive W :D |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |