SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Carb screw length?
/cgi-bin/YaBB.pl?num=1125928980

Message started by Durandal on 09/05/05 at 07:03:00

Title: Carb screw length?
Post by Durandal on 09/05/05 at 07:03:00

I searched the earlier posts regarding replacing the screws on the carb with new ones when doing the re-jet. I know they are M5 screws, but what length are they, especially the screws on the float bowl? Want to make sure I get the right ones before I start taking my carb apart.

Title: Re: Carb screw length?
Post by lancer on 09/05/05 at 07:14:56

Take the old ones from the carb to the hardware store with you, that way you get the right length, width and thread size.

Title: Re: Carb screw length?
Post by Reelthing on 09/05/05 at 19:00:49

M5 25mm on the bowl and m5 20mm on the diaphram cover is what I used

Title: Re: Carb screw length?
Post by threezukes on 09/06/05 at 04:03:45

I just bought some today. I took the old screws to the store and the sizes were 5x10mm for the top and 5x15mm for the bowl

Title: Re: Carb screw length?
Post by Reelthing on 09/06/05 at 04:59:02

I needed to measure twice - pickup the spares - and thread length of 10/15 it is