|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Need Torque spec help /cgi-bin/YaBB.pl?num=1129663951 Message started by realdeal on 10/18/05 at 12:32:31 |
|
Title: Need Torque spec help Post by realdeal on 10/18/05 at 12:32:31 Anyone know what the torque specs. are of all of these bolts? Are they all the same spec, or are some supposed to be snugged tighter than others? http://suzukisavage.com/images/uploaded/HeadCovSeal01web.jpg Thanks! |
|
Title: Re: Need Torque spec help Post by torque on 10/18/05 at 15:11:33 they are all 8.5 ft lbs |
|
Title: Re: Need Torque spec help Post by Reelthing on 10/18/05 at 20:15:34 realdeal wrote:
6 to 8 lbs but I'd bet 5lbs would do - it doesn't take much - I use small stuff 1/4 in drive and a 3 inch 10mm boxend - be sure your at tdcc |
|
Title: Re: Need Torque spec help Post by Savage_Rob on 10/19/05 at 05:18:27 And I had a couple I had to approximate because I couldn't get my torque wrench on it. |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |