SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> chain guard problems /cgi-bin/YaBB.pl?num=1145887257 Message started by stinger139 on 04/24/06 at 01:49:57

Title: chain guard problems Post by stinger139 on 04/24/06 at 01:49:57 Can someone tell me what Im doing wrong? I mounted a new rear tire. I had the bike on blocks so the wheel spun.  After mounting the wheel I spun it and it spun freely. I went ahead and adjusted the belt tension and tightned everything down. I lowered the bike and put on the chain guard and for some reason the belt wont line up quite right with the chain guard and it rubs. I have gone thru the Clymer manual and it seems I have everything in the right place.  I cant figure it out. Anyone have any Idea what Im doing wrong? Any suggestions?

Title: Re: chain guard problems Post by vroom1776 on 04/24/06 at 07:42:13 There is an extra wahser that is basically a spacer on the rear.  Are you sure you have it in the right place?  I think it goes between the shock bushing and the nut, away from the guard.

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.