SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Speedo cable washer/gasket
/cgi-bin/YaBB.pl?num=1151688523

Message started by marty62253 on 06/30/06 at 10:28:43

Title: Speedo cable washer/gasket
Post by marty62253 on 06/30/06 at 10:28:43

Anyone know where I can get the little seal/washer thingy that likes to fall out of the speedo cable when you remove it from the tranny case? You know, it looks like a washer but it's got a rubber surface. It's great for keeping the pin on the end centered and the oil off your right ankle. Mine liberated itself recently.Stealership diagrams do not show it. They say get the whole cable.

Title: Re: Speedo cable washer/gasket
Post by thumperclone on 06/30/06 at 10:31:08

got one from the hardware store may take a couple of tries to get the perfect one...

Title: Re: Speedo cable washer/gasket
Post by Savage_Rob on 06/30/06 at 12:25:11

Make sure you get something that is petroleum resistant, like nitrile. One easy solution is to go to Harbor Freight. They have a box with an assortment or nitrile o-rings for about $7. Take it home and use whichever fits.

http://www.harborfreight.com/cpi/photos/31600-31699/31677.gif

Title: Re: Speedo cable washer/gasket
Post by Brewbrother on 06/30/06 at 16:19:33

check the market place. A few bikes are being parted out. Looks like a new one started within the last few days.