SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Header bolt torque setting?
/cgi-bin/YaBB.pl?num=1154908589

Message started by Guido on 08/06/06 at 16:56:29

Title: Header bolt torque setting?
Post by Guido on 08/06/06 at 16:56:29

Does anyone know what the correct torque setting is for the header pipe bolts where it attaches to the head? I looked at the list in tech section and I'm unsure which one it is. HELP!! ;D

Title: Re: Header bolt torque setting?
Post by Guido on 08/06/06 at 17:21:25

Is it the one that states "exhaust pipe clamp bolts"?

Title: Re: Header bolt torque setting?
Post by rokrover on 08/06/06 at 18:20:07

13 - 20 ft.lb. It's not so critical as these need to be snugged up every once in a while as the gasket compresses with heat cycling. Make sure there is some sort of anti-sieze grease (e.g. moly) on the threads.

Title: Re: Header bolt torque setting?
Post by Guido on 08/06/06 at 19:05:14

thanks, I'll give it a shot!