SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Bar ends
/cgi-bin/YaBB.pl?num=1156027624

Message started by steelwolf on 08/19/06 at 15:47:04

Title: Bar ends
Post by steelwolf on 08/19/06 at 15:47:04

Any ideas on how to attach the bar ends? I though maybe super glue but then if I need to get them off I may be facing another problem all together. :-/

Title: Re: Bar ends
Post by serowbot on 08/19/06 at 16:13:55

The ones I've had in the past have a rubber compression plug that tightens inside the bar via hex screw on the end.
Oops!
Maybe you meant the stockers. If they are loose just wedge some tape in the hole and shove.

Title: Re: Bar ends
Post by SavageDude on 08/19/06 at 18:02:18

How about hot glue gun?

Title: Re: Bar ends
Post by azjay on 08/20/06 at 08:26:17

if you glue the end of the bar, how would you refill the stein? ???

Title: Re: Bar ends
Post by steelwolf on 08/20/06 at 11:38:34

The hot glue worked great, thanks. As for the stein, I left a hole for a funnel. ;D

Title: Re: Bar ends
Post by steelwolf on 08/20/06 at 19:52:00

Hot glue just give it up after about 50 miles. Guess I'll just use the super glue and then fight them off later if need be.

Title: Re: Bar ends
Post by clueless on 08/20/06 at 20:17:02

Removed mine when I changed bars. Lost one a couple of days later. ordered new ones. They had ridges on them and I had to hammer them in. Knowing what i do now, I'd use silicon sealer if I was putting old ones back. Immune to vibration. My .02 ;D