|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> A "Look" for a Custom Savage? /cgi-bin/YaBB.pl?num=1169645646 Message started by PerrydaSavage on 01/24/07 at 05:34:06 |
|
Title: A "Look" for a Custom Savage? Post by PerrydaSavage on 01/24/07 at 05:34:06 http://i11.tinypic.com/453ywpv.jpg I'll bet that some of you Master Savage Bobbers out there could emulate the above "look" pretty closely eh? |
|
Title: Re: A "Look" for a Custom Savage? Post by hutch on 01/24/07 at 07:51:16 Her is a link to another nice look. http://i6.ebayimg.com/02/i/000/86/1d/653f_12.JPG |
|
Title: Re: A "Look" for a Custom Savage? Post by vroom1776 on 01/24/07 at 09:18:01 what's the engine in the first bike perry? |
|
Title: Re: A "Look" for a Custom Savage? Post by PerrydaSavage on 01/24/07 at 09:50:03 Not sure ... probably a Triumph mill ... a pal who's right into Trumps sent the photo link to me ... |
|
Title: Re: A "Look" for a Custom Savage? Post by SAMM on 01/24/07 at 13:38:13 Notice the kick starter beeing used as the side stand ?? |
|
Title: Re: A "Look" for a Custom Savage? Post by Bugscraper on 01/24/07 at 18:17:59 Now you're talkin'! What I'd really like to have is a W650 on a soft-tail frame -- kickstart & all! |
|
Title: Re: A "Look" for a Custom Savage? Post by hutch on 01/24/07 at 18:23:33 vroom1776 wrote:
Perry is correct, it is a 1962 or older Triumph. In 1963 the motor and trans were enclosed in the same case, like the Savage. The one in the picture is known as a pre-unit, before making engine and trans 1 unit. |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |