SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Dyna Silencer & Jet kit...
/cgi-bin/YaBB.pl?num=1217666942

Message started by sharp21 on 08/02/08 at 01:48:59

Title: Dyna Silencer & Jet kit...
Post by sharp21 on 08/02/08 at 01:48:59

The wifes new bike backfires like crazy. I am at work so she is gonna go to the local bike shop & have them do the white spacer/carb tune. Looking on fleabay there are a number of dyna silencers for around $25, so I figure we should do that at the same time, to get the jetting right the first time.
Is there a specific type I should be looking for? How does it mount? I did a search but only got a few hits...
Also, is there a specific jet kit for the bike I can get? Where is a good place to get it?
Thx
S.

Title: Re: Dyna Silencer & Jet kit...
Post by sharp21 on 08/02/08 at 01:50:28

These are the ones im looking at

http://cgi.ebay.com/ebaymotors/_Motorcycle-Parts-Accessories__HARLEY-EXHAUST-MUFFLER-PIPES-DYNA-3050_W0QQitemZ200242206082QQadnZMotorcycleQ20PartsQ20Q26Q20AccessoriesQQadiZ2863QQcmdZViewItem?hash=item200242206082&_trkparms=39%3A1%7C65%3A1&_trksid=p4506.c0.m245.l1318

Title: Re: Dyna Silencer & Jet kit...
Post by YonuhAdisi on 08/02/08 at 01:56:05

The jet kit you can get right here, just contact Lancer. I don't know about the mufflers, I run a Jardine muffler myself.

Title: Re: Dyna Silencer & Jet kit...
Post by sharp21 on 08/02/08 at 06:25:29

Okay sounds good!
Now I just need to find a great sounding pipe...
S.

Title: Re: Dyna Silencer & Jet kit...
Post by seviersavage on 08/02/08 at 07:39:53

I was running a jardine, bike backfired a lot. I did the white spacer mod and riched up the air fuel mixture, it helped but didn't stop it. Then I put on a dyna muffler and bingo no more backfires -- at all.
I got it on e-bay for 5 bucks plus shipping, was used and blued slightly but an easy bolt up.
Seviersavage

Title: Re: Dyna Silencer & Jet kit...
Post by sharp21 on 08/02/08 at 09:11:22

Should I just be searching for ANY dyna pipe? And it will pretty much bolt right on?
S.

Title: Re: Dyna Silencer & Jet kit...
Post by northshore_paul on 08/02/08 at 09:16:12

Seiver...did you slide your dyna muffler directly onto the stock header or did you use an adapter to match them up and vary the angle a little? I found I needed an adapter to have the muffler mate up with the stock mounting bracket (well not exactly but close enough) and with a little angle to it so it would lie flat against the bracket.