SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> shorter turn signals
/cgi-bin/YaBB.pl?num=1236278402

Message started by jacobrando on 03/05/09 at 10:40:02

Title: shorter turn signals
Post by jacobrando on 03/05/09 at 10:40:02

i've got an 87 savage and wanted too know if anyone
knows where you can find shorter turn signals/fit closer to the frame
i bought some off ebay but could not mount them
also would be interested if anyone had any modification ideas for
the factory signals ;)

Title: Re: shorter turn signals
Post by diamond jim on 03/05/09 at 11:10:02

I don't think there is much you can do with the factory turns. Maybe one of the savvy members on here has managed to mod them somehow and they'll post some pics and/or link. You might make brackets and run a bolt thru the stock mounts to hold the bracket on and mount the turns to the brackets. The surface mount LEDs probably work best for that. Most just buy aftermarket turns and adapt them to the stock mounts or mount them elsewhere and remove the stock mounts all together.

Title: Re: shorter turn signals
Post by serowbot on 03/05/09 at 11:31:51

Yup!,...What he said....
http://p1.bikepics.com/pics/2007%5C01%5C12%5Cbikepics-769803-800.jpg

Title: Re: shorter turn signals
Post by diamond jim on 03/05/09 at 14:43:20

Nice job. I like that.

Title: Re: shorter turn signals
Post by photojoe on 03/06/09 at 17:20:45

23282A262B3B28272D26490 wrote:

If you're getting rid of your OEM signals, I need a right rear stock signal.

Title: Re: shorter turn signals
Post by Demin on 03/08/09 at 07:06:15

Fronts are in the mirrors.
http://p1.bikepics.com/pics/2007/09/09/bikepics-1018369-800.jpg