SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> wheel spacers - front
/cgi-bin/YaBB.pl?num=1278427745

Message started by weracerc on 07/06/10 at 07:49:05

Title: wheel spacers - front
Post by weracerc on 07/06/10 at 07:49:05

when changing the front tire - re-assembling the wheel to fork and torquing the axle to 26 -32ftlbs per the clymer manual - once completed do the wheel spacers turn or are they locked in to the forks and placing pressure on the inner race of the wheel bearings therefore not spinning when the wheel spins?

Title: Re: wheel spacers - front
Post by bill67 on 07/06/10 at 08:10:28

They don't spin.

Title: Re: wheel spacers - front
Post by verslagen1 on 07/06/10 at 08:10:34

should be tight.

The one with a wide flange should be on the disk side.

Title: Re: wheel spacers - front
Post by Phelonius on 07/06/10 at 09:23:22

If they spin, you have serious problem.

Phelonius

Title: Re: wheel spacers - front
Post by weracerc on 07/06/10 at 09:58:36

they are tight just wanted to make sure that was the correct re-assembly result.