|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> fixed it,but i have a question /cgi-bin/YaBB.pl?num=1297973298 Message started by B1-66er on 02/17/11 at 12:08:18 |
|
Title: fixed it,but i have a question Post by B1-66er on 02/17/11 at 12:08:18 Well after losing clutch function in October, then having problems getting parts, i got the bike fixed today. Clutch cam was snapped in half. On the up side, the bike sat since it broke, all through the winter, and started right up, awesome! So here is my question, i remember people on here saying that the clutch arm thing needs to be between the two marks on the case. I have the bottom of the arm between them, but the top of it is about one eighth of an inch above it. I can't seem to fix it, regardless of how much i adjust. Any tips? Thanks |
|
Title: Re: fixed it,but i have a question Post by Oldfeller on 02/17/11 at 12:45:42 The bottom of the arm is what counts, and that with a very mild upward tension (such as offered by means of a thin rubber band) to take all of the loose slop out of the lever arm / eccentric piece / springs system. The way you move this lever arm thingie is to replace your clutch rod with one of a different length (longer rod lowers the lever, shorter rod raises it). "adjusting" at your clutch lever or at the round threaded cable thingie does nothing to change this relationship. Changing the rod is what makes it move. |
|
Title: Re: fixed it,but i have a question Post by B1-66er on 02/17/11 at 12:54:33 So it's fine the way it is? |
|
Title: Re: fixed it,but i have a question Post by Digger on 07/26/11 at 20:58:26 1D3E3634373E3E3720520 wrote:
Old, Ever since I started this thread (http://suzukisavage.com/cgi-bin/YaBB.pl?num=1246935676/0) a few years back, I've been laboring under the misconception that you used the arm's longitudinal centerline to see where you fell (hopefully) between the crankcase marks. You are saying to use the bottom of the arm to make this determination. Please elaborate.....I'm in the learning mode! 8-) |
|
Title: Re: fixed it,but i have a question Post by Digger on 08/17/11 at 19:19:28 Anybody? TIA! |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |