SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> torque specs
/cgi-bin/YaBB.pl?num=1365351693

Message started by wambr on 04/07/13 at 09:21:33

Title: torque specs
Post by wambr on 04/07/13 at 09:21:33

I beg your pardon, but I have a question what torque nuts(4 nuts) cylinder head to the cylinder should be? though I like, and not a newbie to the forum, but when a scheduled repair I had this question. Climer don't give answer for me...
can it of course and "lost in translation"...in General please help

Title: Re: torque specs
Post by verslagen1 on 04/07/13 at 09:52:07

There are 4 on top and 2 underneath

ITEM N-m | ft-lb
Cylinder
head nuts (9mm) 29.0 33.0 | 21.4 24.3
Cylinder
head-to-cylinder nuts (8mm) 23.0 27.0 | 17.0 19.9

Title: Re: torque specs
Post by wambr on 04/07/13 at 10:08:34

thanks Versy!!! just it wasn't clear: 8mm-this thread size or the size of the head of the nuts.. I mean properly tightened nut

Title: Re: torque specs
Post by verslagen1 on 04/07/13 at 11:32:47

the size of the nuts are quite a bit larger than 8mm, so that would be thread size.