SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Making it Shiny
/cgi-bin/YaBB.pl?num=1367679292

Message started by Phoenix on 05/04/13 at 07:54:52

Title: Making it Shiny
Post by Phoenix on 05/04/13 at 07:54:52

Any good suggestions on how to clean and shine the non chrome but shiny metal parts of the bike???? Its become a dull grey

Title: Re: Making it Shiny
Post by verslagen1 on 05/04/13 at 08:37:41

http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1182464837

Title: Re: Making it Shiny
Post by paulmarshall on 05/04/13 at 12:36:41

This is what I use and it is awesome.
http://www.youtube.com/watch?v=zC6Yy94ocOo

Title: Re: Making it Shiny
Post by Phoenix on 05/04/13 at 17:22:04

Thanks for the info

Title: Re: Making it Shiny
Post by justin_o_guy2 on 05/05/13 at 07:55:00

Rubbing a spoke is not easy, so, I pulled the innards out of parachute cord, made 1 wrap around a spoke, pulled it tight & pulled one end, dragging it around & around & up & down the spoke. It gets HOT if you over do it.