SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Engine swap
/cgi-bin/YaBB.pl?num=1396109982

Message started by 533clive on 03/29/14 at 09:19:42

Title: Engine swap
Post by 533clive on 03/29/14 at 09:19:42

You may have seen elsewhere on the forum that I have a second savage, minus an engine that is being re-built.

I now have an engine for it, but have a couple of questions.

The engine number is 112483, any idea what year it is?

Also, the bike it's going into is a 96. The igniter unit on the bikes wiring loom has two connectors (seven wires, and two wires). The igniter unit with the engine has nine connectors in one block. Can I use the one that came with the bike, and if I have to use the 'engine' one, what's the wiring plan?

Thanks in advance

Title: Re: Engine swap
Post by Dave on 03/29/14 at 09:34:31

Use the igniter assembly that matches the frame and wiring harness.

Title: Re: Engine swap
Post by verslagen1 on 03/29/14 at 09:40:55

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1240553196

112483

1987.....P401-113xxx

Quote:

Also, the bike it's going into is a 96. The igniter unit on the bikes wiring loom has two connectors (seven wires, and two wires). The igniter unit with the engine has nine connectors in one block. Can I use the one that came with the bike, and if I have to use the 'engine' one, what's the wiring plan?

the TDI's between the 2 years aren't compatible, different timing and wiring.
you'll either have to swap the igniter and connector or the rotor.
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1280002938

Title: Re: Engine swap
Post by 533clive on 03/29/14 at 09:43:51

Great stuff, thanks.

One more question.

The seven pin connector (orange/white, black/yellow, green, black x2, orange, black, black/white) matches the wiring diagrams, but the two wire connector (green, brown/black) doesn't seem to appear anywhere. Any ideas?

Title: Re: Engine swap
Post by 533clive on 03/29/14 at 09:50:07

43504746595452505B04350 wrote:

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1240553196

the TDI's between the 2 years aren't compatible, different timing and wiring.
you'll either have to swap the igniter and connector or the rotor.
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1280002938

I have the igniter, but no wiring plan for the connectors

Title: Re: Engine swap
Post by verslagen1 on 03/29/14 at 10:08:12

http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1116429173

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1293638302/0

Title: Re: Engine swap
Post by 533clive on 03/29/14 at 10:21:02

Thanks again people! :)

Title: Re: Engine swap
Post by 533clive on 03/29/14 at 11:34:14

Soooooooooo, anyone got a connector-by-connector plan for an '87 igniter unit......cos I can't find one!!