|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> gaskets /cgi-bin/YaBB.pl?num=1415938880 Message started by bobdog on 11/13/14 at 20:21:20 |
|
Title: gaskets Post by bobdog on 11/13/14 at 20:21:20 where's the best place to buy gaskets ? :-[ |
|
Title: Re: gaskets Post by justin_o_guy2 on 11/13/14 at 20:26:15 Depending on what you need. I can get side cover gasket cut while I wait,locally,cheap |
|
Title: Re: gaskets Post by bobdog on 11/13/14 at 20:30:39 clutch cover gasket |
|
Title: Re: gaskets Post by justin_o_guy2 on 11/13/14 at 20:33:03 Call around local independent bike shops. And the Suzuki,of course |
|
Title: Re: gaskets Post by Serowbot on 11/13/14 at 21:06:46 I bought a sidecase gasket on e-bay... nicely cut, but would not seal... even at torques more than double... it was just too thick and porous... I ended up buying factory original... They did refund my money,... but, I had to do the job 3 times... Using the factory gasket,.. everything sealed up perfect, no problem... Wish I'd spent the extra $20 in the first place... If the job is a hassle,... don't skimp... ;)... |
|
Title: Re: gaskets Post by justin_o_guy2 on 11/13/14 at 22:41:09 Imagine a printer,but instead of printing,it runs a stylus, cutting the gasket out,off a roll. The difference is,this place Uses that to make the gaskets they need. Been a few years, I spent 14ish bux,, And they don't have the factory oil control bead of goo. I had no real problem. I don't use rtv on this kinda stuff.. Three Bond, Yamabond,, |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |