|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Tool Cover Rattle! /cgi-bin/YaBB.pl?num=1456424634 Message started by hawk41 on 02/25/16 at 10:23:54 |
|
Title: Tool Cover Rattle! Post by hawk41 on 02/25/16 at 10:23:54 On my recent purchase of a 2004 Savage I found that the tool cover is very loose & rattles when underway. While reading an unrelated post I learned that there is supposed to be a gasket on this cover. Does anyone have a good DIY solution as the local Suzuki dealer is not enthusiastic about ordering parts for bikes over 10 years old. In addition there was no tool kit, so if you were designing your own kit, what tools would you include? (MY previous experience with tool kits supplied by a manufacturer were that they were lacking in functionality for the most part)! Any suggestions would be appreciated! |
|
Title: Re: Tool Cover Rattle! Post by verslagen1 on 02/25/16 at 10:35:58 tell the idiot that the bike is in current production. better yet, just order on line. you'll have to wait for delivery anyway. tool kit is listed in the tech section index... http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1108327792 |
|
Title: Re: Tool Cover Rattle! Post by Dave on 02/25/16 at 10:39:41 Have him order you one for the 2016 model. http://www.hondaofflorence.com/fiche_section_detail.asp?section=7566487&category=Motorcycles&make=SUZUKI&year=2016&fveh=276190 The part number is: 47445-24B00 The cost is: $ 2.88. |
|
Title: Re: Tool Cover Rattle! Post by hawk41 on 02/25/16 at 13:35:05 Ordered the part! Way, way, more expensive than I expected @ $3.11 w/tax! LOL ;D |
|
Title: Re: Tool Cover Rattle! Post by KennyG on 02/25/16 at 17:25:58 Hawk, I searched all over trying to find rubber molding similar to what Suzuki uses and I have been unable to find anything. So I paid through the nose too. I think that you will find Suzuki parts are among the most expensive of any bike. Kenny G |
|
Title: Re: Tool Cover Rattle! Post by oldNslow on 02/25/16 at 17:48:01 Most of the gasket on my tool box cover was missing when I bought the bike. I folded thin strips of black duct tape over the edges all the way around. Cheap. And it doesn't fall off every time I remove the cover. |
|
Title: Re: Tool Cover Rattle! Post by Kris01 on 02/25/16 at 19:40:00 A small bead of silicone or RTV will work if you're in a pinch. |
|
Title: Re: Tool Cover Rattle! Post by justin_o_guy2 on 02/25/16 at 20:49:07 Windshield washer hose, X-Acto knife, rubber cement. |
|
Title: Re: Tool Cover Rattle! Post by Dave on 02/26/16 at 03:16:41 08262D003122302B430 wrote:
Checked BMW part prices lately? |
|
Title: Re: Tool Cover Rattle! Post by KennyG on 02/26/16 at 11:19:01 Dave, I haven't checked BMW parts lately but I have checked Buell & Honda parts. Kenny G |
|
Title: Re: Tool Cover Rattle! Post by thumperclone on 02/26/16 at 15:31:24 gone through 3 of those since 06 still have 1 spare #47445-24B00 |
|
Title: Re: Tool Cover Rattle! Post by oldNslow on 02/26/16 at 16:05:03 312D302835203726292A2B20450 wrote:
What happens to them ? Break? Deteriorate? Fall off and get lost? |
|
Title: Re: Tool Cover Rattle! Post by justin_o_guy2 on 02/26/16 at 17:26:27 607F797E63645565556D7F73380A0 wrote:
I built my own when my stock one died. Just gotta be creative at the corners. Door seal glue would probably be better. Stop by a body shop and tell a bodyman you need a dab of Gorilla Snot. |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |