SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Keys
/cgi-bin/YaBB.pl?num=1533619008

Message started by verslagen1 on 08/06/18 at 22:16:48

Title: Keys
Post by verslagen1 on 08/06/18 at 22:16:48

Anybody with a 2000 or a 2006 with a stock key?

In fact any year will help somebody out there.

Can you tell me the letter on your key?

Title: Re: Keys
Post by GOF on 08/07/18 at 06:30:02

I have an '88. The letter id 'D'

Title: Re: Keys
Post by stewmills on 08/07/18 at 08:44:29

The blanks are different for that span of years.

Here is 86-88 and 95-04:

Title: Re: Keys
Post by stewmills on 08/07/18 at 08:45:58

Ans here is what they say is for 05-17.

Not sure if they are really different or these are stock images...that's just what the website said where this came from. If it has them listed and categorized differently for these two different groups, something must be different. Images look exactly the same to me so this must be a "stock photo" situation.

Title: Re: Keys
Post by stewmills on 08/07/18 at 09:07:28

But...this is the actual ILCO list of some available blanks for our bikes...what we can't tell you is which blank YOUR bike is keyed for.

Title: Re: Keys
Post by verslagen1 on 08/07/18 at 09:21:45

So, if I had to guess...

86 f
87 c
88 D Confirmed
89 e
90 f
91 c
92 d
93 e
94 f
95 C
96 F ilco YH49
97 d
98 e
99 f
00 c
01 d
02 e
03 f
04 c
05 D/E
06 e Silca DAT15DP
07 D
08 c
09 F "JMA" brand blank YAMA 20D thinned
10 d
11 E
12 f
13 c
14 d
15 e
16 E
17 c
18 d

Capital letters are info from members.
lower case are suspected sequence.

Title: Re: Keys
Post by JAGGUY on 08/07/18 at 12:15:04

No markings on my oem key.

I had an extra key made for my 09, smith used a "JMA" brand blank YAMA 20D. It was a little thick so I filed it a little thinner and works fine.

Looks like a YH51 or an F series pictured above.

Title: Re: Keys
Post by antmanbee on 08/07/18 at 17:45:26

No markings on my OEM keys but I have the little tag that came with it and the number starts with a D.
This is on an 05.

Title: Re: Keys
Post by Panhead on 08/07/18 at 19:21:37

My 95 came with ilco YH49. My 96 came with original F code. Hope this helps.

Title: Re: Keys
Post by batman on 08/08/18 at 09:34:07

my 95 stock key is a C code

Title: Re: Keys
Post by NucleaRR on 08/08/18 at 09:40:54

I see for 2005 you have D listed as the code. Mine is a 2005 and the key code starts with an E.

Title: Re: Keys
Post by Papa Bear on 08/09/18 at 05:18:22

My 2011 is an "E"

Title: Re: Keys
Post by Gary on 08/09/18 at 06:38:01

The little tag with my 07 has D on it but no marks on the keys.
Gary

Title: Re: Keys
Post by elricfate on 08/09/18 at 10:03:51

My OEM key is at the house but the local locksmith made a handful of keys for me using a Silca DAT15DP blank for my 2006. I actually prefer them over my OEM.

Title: Re: Keys
Post by verslagen1 on 08/09/18 at 10:32:44

6C6B7A68727673736C1F0 wrote:

But...this is the actual ILCO list of some available blanks for our bikes...what we can't tell you is which blank YOUR bike is keyed for.

The picture of the Keys says YH48/49/50/51 for C/D/E/F
which doesn't agree with the ilco list.

Title: Re: Keys
Post by DragBikeMike on 08/10/18 at 00:32:49

I have a 2016 LS650. I have two sets of keys. One set has a black plastic handle that reads "Boulevard". The other set has a black plastic handle that reads "Suzuki". The set labeled "Boulevard" has no identifying markings. The set labeled "Suzuki" has a black plastic tag on the key ring that has the identifier "C121" embossed in the tag.

The main keys look like the key identified as "E" on stewmill's post (top groove thinner than bottom groove) but the tag says they should look like the key identified as "C" on stewmill's post (top groove and bottom groove nominally the same width).

Hope this info helps.

Title: Re: Keys
Post by verslagen1 on 08/10/18 at 07:38:12

4D4B44383A3D39090 wrote:

If it looks like a duck then it must be a duck.
The key code is usually a letter followed by 5 digits which represent the cut. And not all cuts are usable, 2 or 3 levels different in progression. Or the key could get stuck in the lock.