SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> size of clutch nut
/cgi-bin/YaBB.pl?num=1578118033

Message started by jswalton84 on 01/03/20 at 22:07:13

Title: size of clutch nut
Post by jswalton84 on 01/03/20 at 22:07:13

looking for the size of the clutch nut

06 ls650 clutch is shot and so is the throw out bearing

the person who owned the bike before me, never showed it any love :'(

Title: Re: size of clutch nut
Post by jswalton84 on 01/03/20 at 22:07:41

https://www.suzukipartshouse.com/oemparts/a/suz/506b36bcf870022ba8af9e45/clutch

part number 5

Title: Re: size of clutch nut
Post by jswalton84 on 01/03/20 at 22:10:30

also since i own a 2006 it would be model k6 correct?

Title: Re: size of clutch nut
Post by verslagen1 on 01/03/20 at 22:39:22

it's either a 30 or 32 mm
harbor freight has a set of metric impact sockets that'll do the job.

Title: Re: size of clutch nut
Post by jswalton84 on 01/04/20 at 00:11:22

thanks so much for the response,

Title: Re: size of clutch nut
Post by DragBikeMike on 01/04/20 at 20:13:09

It's a 32mm wrench size, which is directly equivalent to a 1-1/4". The thread series is M22 x 1.00 pitch.