SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> the usual questions /cgi-bin/YaBB.pl?num=1599896146 Message started by Ando on 09/12/20 at 00:35:46

Title: the usual questions Post by Ando on 09/12/20 at 00:35:46 hey folks, made the dyna swap. have a very tiny leak at the joint because i couldn't get a decent blade to make the slits in the pipe. can anyone recommend a sealer i could apply? so far i have a tin can crush gasket between header and muffler and also between 1 7/8" clamp and muffler. sounds GREAT. noticed classic signs of having to rejet. i do live in Canada, and with covid...getting a jetkit from our good friend lancer might be a bit too much hassle. any Canadians have a line on a jetkit/rebuild kit to get a step up on main and pilot? im sure ill need new seal and o rings, shes a 96 barely touched. spacer mod should be easy with what i can acquire locally. cheers.

Title: Re: the usual questions Post by Yoshi on 09/12/20 at 06:32:01 Take the pipe off and cut slits then reassemble. If you only swapped the muffler then all you need is a larger main, I'm in Ny 152.5 worked perfect for me

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.