|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> The Marketplace >> Looking for a Head and Some Gear Pics /cgi-bin/YaBB.pl?num=1601684916 Message started by Mothership on 10/02/20 at 17:28:36 |
|
Title: Looking for a Head and Some Gear Pics Post by Mothership on 10/02/20 at 17:28:36 I am working on a new project and have an engine that the cam bearing/channel is tore up. Anyone have a head laying around for fairly cheap ? I am in Utah 84062 for shipping purposes. My engine is a 2005 but not much changed over the life of the Savage/S40. Also I need some GOOD pictures of how the transmission forks and gears fit together. This engine came to me in boxes so I am not sure how to reassemble. It is a 5spd. I looked in the manuals but need better visuals. Thanks for your help guys ! |
|
Title: Re: Looking for a Head and Some Gear Pics Post by verslagen1 on 10/02/20 at 19:57:14 in the tech section is the savage companion. download it for a ton of pictures. |
|
Title: Re: Looking for a Head and Some Gear Pics Post by Dave on 10/03/20 at 04:16:06 I have a head.......do you need the cam/rockers? |
|
Title: Re: Looking for a Head and Some Gear Pics Post by Mothership on 10/03/20 at 10:50:13 Nope I have the rocker assemblies and covers. How much shipped to 84062 ? You can PM if you need to. Thanks |
|
Title: Re: Looking for a Head and Some Gear Pics Post by Mothership on 10/03/20 at 10:52:13 786B7C7D626F696B603F0E0 wrote:
Thanks I will check this out for sure ! |
|
Title: Re: Looking for a Head and Some Gear Pics Post by Dave on 10/03/20 at 13:01:32 67455E424F585942435A2A0 wrote:
I can PM you - but I don't believe you can PM me until you get a total of 10 posts. Better get busy posting 7 more comments here in your Marketplace listing. |
|
Title: Re: Looking for a Head and Some Gear Pics Post by Mothership on 10/03/20 at 13:20:10 True. I saw that limitation |
|
Title: Re: Looking for a Head and Some Gear Pics Post by Mothership on 10/03/20 at 13:21:38 352631302F2224262D72430 wrote:
Dang that is AWESOME....very helpful for what I needed. Thank You |
|
Title: Re: Looking for a Head and Some Gear Pics Post by Mothership on 10/03/20 at 14:11:57 So i also just bought a 1987 Parts Bike. So now I have 2 LS650s. Any other parts I should look for ? |
|
Title: Re: Looking for a Head and Some Gear Pics Post by Mothership on 10/03/20 at 14:23:59 49727F6879756E68737B76691A0 wrote:
I can PM you - but I don't believe you can PM me until you get a total of 10 posts. Better get busy posting 7 more comments here in your Marketplace listing.[/quote] Got it |
|
Title: Re: Looking for a Head and Some Gear Pics Post by Fast 650 on 10/03/20 at 17:01:57 082A312D2037362D2C35450 wrote:
Get someone to help when you assemble the transmission. Trying to hold everything in place by yourself as you spin it to check that it shifts through all 5 gears is difficult. A second pair of hands makes this step much easier. Two of the forks are near identical and easy to mix up. If you don't catch that mixup you will only have a 3 speed when you assemble the case halves and you get to split the cases and start over then. |
|
Title: Re: Looking for a Head and Some Gear Pics Post by Mothership on 10/03/20 at 17:08:53 Thank You for the info. I think, that is where I am at right now. I finally felt that I got them correct and reassembled the case. Now I am not so sure.....LOL |
|
Title: Re: Looking for a Head and Some Gear Pics Post by Dave on 10/06/20 at 14:42:04 I have 2 heads that may interest you. The quoted prices do not include cams or rockers....or hardware. One is in good shape and "as-is" from the bike.....greasy and dirty. It will clean up nicely and all bearings and threads are good - it appears the bike was running a bit rich. $220 shipped. (Add $25 and I will pull the valves and clean off the carbon from them and install new valve seals). The other head has been cleaned up and all paint has been removed.....so you will need to paint it the color of your choice (I recommend Eastwood 2K ceramic paint). All carbon is gone and I will install the cleaned up valves and install new valve seals. $300 shipped. Mothership gets first choice.....then anyone else can inquire if you need a head. I have lots of photos and can email them if you want...I will post a couple later this evening. |
|
Title: Re: Looking for a Head and Some Gear Pics Post by Dave on 10/07/20 at 10:07:09 Head 1: Nice head, good cam bearings, all threaded holes good, a bit dirty and a it includes the carbon from the previous rides. |
|
Title: Re: Looking for a Head and Some Gear Pics Post by Dave on 10/07/20 at 10:14:27 Head 1: |
|
Title: Re: Looking for a Head and Some Gear Pics Post by Dave on 10/07/20 at 10:15:37 Head 2: The head has been stripped of all dirt, carbon, grease and paint. I can assemble it with new valve seals and you can paint it any color you want. |
|
Title: Re: Looking for a Head and Some Gear Pics Post by Dave on 10/07/20 at 10:16:02 Head 2: |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |