SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> 5 Pole Relay needed with M Unit wiring?
/cgi-bin/YaBB.pl?num=1616210545

Message started by Memphispatton on 03/19/21 at 20:22:25

Title: 5 Pole Relay needed with M Unit wiring?
Post by Memphispatton on 03/19/21 at 20:22:25

Hi everybody, I'm new to this forum, and had a quick question.

I'm re-wiring using an M-Unit.  Do I need one of those 5 Pole relays wired in between the M-Unit and the CDI?  Or can I just run the kill switch directly to the CDI?

The relay can be found here:

https://shop.revivalcycles.com/waterproof-relay/

Does anyone have the correct wire positions into the CDI for a 2002?

Does the CDI need constant 12 V power when the key is on?  Any other M-Unit wiring advice / experience would be helpful.  Thanks!  

Title: Re: 5 Pole Relay needed with M Unit wiring?
Post by Armen on 03/19/21 at 20:47:41

When I did my M-Unit I just fed the CDI from the unit. No relay.
I have the earlier M. Pretty simple. I used micro switches on the handlebars and the M-Button. That made it easier than trying to make the stock switches work.

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.