SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> The Marketplace >> 3d printing /cgi-bin/YaBB.pl?num=1645998934 Message started by Newtbox on 02/27/22 at 13:55:34

Title: 3d printing Post by Newtbox on 02/27/22 at 13:55:34 does anyone here 3d print? Is there anyway you could 3d print a cover for the gas tank where the speedometer goes on a savage. I removed my speedometer for a digital one on the bars and don’t want a hole or the old speedometer

Title: Re: 3d printing Post by Dan P on 02/27/22 at 14:35:19 I would be interested too. Right now I'm going with the stock setup, because I didn't want the hole in the tank either.

Title: Re: 3d printing Post by mdh152 on 04/14/22 at 21:19:52 507B696A7C71661E0 wrote: does anyone here 3d print? Is there anyway you could 3d print a cover for the gas tank where the speedometer goes on a savage. I removed my speedometer for a digital one on the bars and don’t want a hole or the old speedometer Hi! I do 3D printing and I'm proficient in CAD. Currently I do not currently have an ABS printer, however I'll likely be investing in one soon. This isn't a part I'd want to make out of PLA, PETG, etc. If you have any ideas for any other parts for this bike, let me know. I'm planning on making ABS parts for several different platforms at the moment.

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.