SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Clutch Cover Removal
/cgi-bin/YaBB.pl?num=1702228601

Message started by ThumperPaul on 12/10/23 at 09:16:41

Title: Clutch Cover Removal
Post by ThumperPaul on 12/10/23 at 09:16:41

Novice question. I've never removed the clutch cover before...

When removing the clutch cover, the clutch release arm remains in the cover and comes away with the cover. When the cover is pulled and being broken away from the case, do I need to be concerned about various clutch parts springing out and flying across the garage and going to never never land (like pushrod, release cam, bearing, o-rings, etc)?

Title: Re: Clutch Cover Removal
Post by Surviving Philly on 12/10/23 at 10:22:47

Nah it comes off easy everything stays intact. Make sure when you go to bolt it back up the clutch lever on the case is not positioned in such a way as to obstruct, like hold the lever up for clearance.

Depending on what youre doing in there make sure the dowel pin for the oil pump doesn't get lost if you're pulling the basket.

If you don't have an impact gun keep the bike wheels down in gear with the rear brake depressed to break the clutch nut.

Title: Re: Clutch Cover Removal
Post by ThumperPaul on 12/10/23 at 11:00:17

Thanks Brother!