SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Turning over by hand /cgi-bin/YaBB.pl?num=1703222464 Message started by Surviving Philly on 12/21/23 at 21:21:04

Title: Turning over by hand Post by Surviving Philly on 12/21/23 at 21:21:04 Yo savages, Adjusting my valves recently, I kept the spark plug in while turning the crankshaft with a short breaker bar and was surprised how little resistance there was . . . How much should there typically be in a scenario like this? It felt like not much compression but I have no frame of reference.

Title: Re: Turning over by hand Post by verslagen1 on 12/21/23 at 21:41:36 yeah, I do the same.  if you go slow, it'll leak thru the rings and just use a ratchet wrench but there's enough compression that'll spin thru the power stroke.

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.