SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> The Marketplace >> 94mm flat-top dished pistons 10.5:1 CR
/cgi-bin/YaBB.pl?num=1752962089

Message started by LANCER on 07/19/25 at 14:54:49

Title: 94mm flat-top dished pistons 10.5:1 CR
Post by LANCER on 07/19/25 at 14:54:49

I’ve sold out of the 94mm Wiseco flat-top pistons and am considering another order of 12 (minimum required on a custom order).
To do so I need 5-6 prepaid orders to make this workable for me.
Anyone who is interested please respond, here or by text or email.

The process of going from time of order to receipt of the product is 4-6 weeks.

*********

[ch127949][ch65039] If the order for 12 units of the 94mm pistons is completed, I’m thinking of a batch of the 97mm pistons. If so, who might be looking for one or _ ?

Title: Re: 94mm flat-top dished pistons 10.5:1 CR
Post by DragBikeMike on 07/20/25 at 11:06:45

I am interested in both, 94mm & 97mm.

Title: Re: 94mm flat-top dished pistons 10.5:1 CR
Post by LANCER on 07/20/25 at 18:32:25

46404F33313632020 wrote:

I am interested in both, 94mm & 97mm.

Just one each ?

Title: Re: 94mm flat-top dished pistons 10.5:1 CR
Post by FinnHammer on 07/20/25 at 23:13:42

I will take a 97mmm.
Regarding the 94mm, i think it would be a better solution to make it in an oversize, so that it will be nested into a freshly bored and honed, cylinder. Many cylinders will be worn, and the step just above where the rings reverse direction sits lower in the original piston than in the hi comp Wiseco, so this step has to be honed off, leaving a cylinder that may get close to worn out size.
Just my 10 cents.