SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> oil filter o-rings?
/cgi-bin/YaBB.pl?num=1760994185

Message started by Tocsik on 10/20/25 at 14:03:05

Title: oil filter o-rings?
Post by Tocsik on 10/20/25 at 14:03:05

Why in the blasted heck is it so hard to find the O-rings for our oil filter?!
I've re-used mine for quite a while and wanted to replace them at the next oil change. Here in the northern suburbs of Denver it's hard to find a motorcycle parts shop any longer. Buying online, the shipping costs more than the parts.
$9 - $15 shipping for $3 worth of parts.

Someone posted a #114 at O'Reilly's will fit for the small one. Anyone confirm?

And looking online and entering the 09280-72001 for the large O-ring and either 09280-16005 or 09280-15007 for the small one comes back with "does not fit your 2008 Suzuki S40 Boulevard" on Partzilla. Pretty sure those are the correct parts.

Also, what happened to the "site:" search operator on browsers? Did AI just kill that off? Sheesh.

Title: Re: oil filter o-rings?
Post by verslagen1 on 10/21/25 at 13:09:07

found it on ebay, just search for the part no.
Suzuki Genuine O Ring (D:24,Id:73) - 09280-72001
New Genuine Oem Suzuki O Ring, Crankcase - 09280-15007

114 is a standard size o-ring
15.54 2.62 mm

I did a google search with site:suzukisavage.com and it worked.

Ref No
1
1
2
3
4
5
5
6
7
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Part No
11400-24858
11400-24880
11141-24B03
11178-24B00
11241-24B01-H17
11482-24B11
11482-24B20
11483-24B01-H17
11485-24B10
11485-24B20
14181-45C00
09168-06023
09168-10031
09280-07004
09280-09005
09280-10013
09280-15007
09280-17003
09280-24010
09280-33004
09280-46002
09280-60004
09280-72001
Description
Gasket Set
Gasket Set
• . Gasket, Cylinder Head
• . O Ring, Head Cover
• . Gasket, Cylinder
• . Gasket, Clutch Cover
• . Gasket, Clutch Cover
• . Gasket, Generator Cover
• . Gasket, Gear Shift Cover
• . Gasket, Gear Shift Cover
• . Gasket, Exhaust Pipe
• . Gasket (5.8x13x1.2)
• . Gasket (10.2x20x2.3)
• . O Ring (d:1.9,id:6.8)
• . O Ring (d:1.9,id:8.6)
• . O Ring (d:2.4,id:9.6)
• . O Ring (d:2.4,id:15.8)
• . O Ring (d:3.1,id:16.8)
• . O Ring (d:2.4,id:23.7)
• . O Ring (d:3.1,id:32.7)
• . O Ring (d:2.4,id:45.7)
• . O Ring (d:2.4,id:23.0)
• . O Ring (d:2.4,id:73.0)

I'm tired, you figure out which 1s is which.

Title: Re: oil filter o-rings?
Post by Tocsik on 10/23/25 at 18:09:47

Thanks. I shall figure this out!