SuzukiSavage.com - More cubes

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › More cubes

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2 3

More cubes (Read 37 times)

klx650sm2002 Serious Thumper Offline The more I learn the less I know. Posts: 2041 Cumbria,England Gender:	More cubes 09/28/04 at 04:36:14 Has anyone fitted a bigger piston or know where to get one. Thanks in advance Clive W
Back to top	IP Logged

Savage_Greg Serious Thumper Alliance Member Offline Don't go around your ass to reach your elbow... Posts: 7844 SW Washington State Gender:	Re: More cubes Reply #1 - 09/29/04 at 02:54:41 In 4 1/2 years, I haven't heard of anyone installing an overbore kit in the Savage. I know they exist, but no one has mentioned it.
Back to top	IP Logged

klx650sm2002 Serious Thumper Offline The more I learn the less I know. Posts: 2041 Cumbria,England Gender:	Re: More cubes Reply #2 - 09/29/04 at 05:16:47 A kawasaki Nomad piston is a 2mm oversize for the KLX, both J.E.Pistons and Wiseco do a 3mm oversize for SR/XT 500's. Clive W
Back to top	IP Logged

Savage_Greg Serious Thumper Alliance Member Offline Don't go around your ass to reach your elbow... Posts: 7844 SW Washington State Gender:	Re: More cubes Reply #3 - 09/29/04 at 09:37:32 I haven't done an overbore since my dirt bike days
Back to top	IP Logged

Mr 650 Serious Thumper Offline The LS650- Classic style & 4-valve engine Posts: 1389 Mempho Gender:	Re: More cubes Reply #4 - 09/29/04 at 10:10:36 Looked but didn't find a big bore kit.
Back to top	SilverBlue '01,K&N,Snorklectomy,125mm NOS carb, 1/2 spacer & 155, 'Trapp, NC flyscreen, Suzy GelSeat, Osram H4 later..putt. Putt, PUtt, PUTT! 8) HelmetLawsSuck IP Logged

klx650sm2002 Serious Thumper Offline The more I learn the less I know. Posts: 2041 Cumbria,England Gender:	Re: More cubes Reply #5 - 09/29/04 at 10:39:25 Has anybody any knowledge about squish clearances. Thanks again. Clive W
Back to top	IP Logged

klx650sm2002 Serious Thumper Offline The more I learn the less I know. Posts: 2041 Cumbria,England Gender:	Re: More cubes Reply #6 - 09/29/04 at 11:27:05 The DR600S piston might work on the Savage, I think it's 95.5 so 96 would be possible, need to check gudgeon pin diam. Clive W
Back to top	IP Logged

Savage_Greg Serious Thumper Alliance Member Offline Don't go around your ass to reach your elbow... Posts: 7844 SW Washington State Gender:	Re: More cubes Reply #7 - 09/30/04 at 02:39:07 The DR600 has a bigger bore and a shorter stroke than the Savage.
Back to top	IP Logged

klx650sm2002 Serious Thumper Offline The more I learn the less I know. Posts: 2041 Cumbria,England Gender:	Re: More cubes Reply #8 - 09/30/04 at 02:53:02 What bore is the DR600, would it be suitable as a big bore for the Savage. Clive W
Back to top	IP Logged

rkutzner Ex Member	Re: More cubes Reply #9 - 10/28/04 at 17:43:50 How about more compression instead of cubes? I'm sure taking the 8.5 (2005) to around 10 would give more boost and still use pump gas.
Back to top	IP Logged

Savage_Greg Serious Thumper Alliance Member Offline Don't go around your ass to reach your elbow... Posts: 7844 SW Washington State Gender:	Re: More cubes Reply #10 - 10/29/04 at 04:41:18 More compression would be good...either from a bigger piston or from smaller combustion area (same difference). How do we do it?
Back to top	IP Logged

PRH111

Ex Member

Re: More cubes
Reply #11 - 10/29/04 at 23:40:47

Send a piston to Wiseco and ask for them to either check their stock or make a one off piston that is oversize.

Probably be around $100 for a forged piston capable of withstanding 100hp. You can also have them create it such that the compression ratio is increased with the same valve clearance.

You can also have forged rods custom made as well from Pauter...but I don't think any of us will need that unless someone is planning on hooking up a turbo/NO2/supercharger.

(There are other companies that will do the same but Wiseco and Pauter are the two I have had limited dealings with).

IP Logged

Savage_Greg Serious Thumper Alliance Member Offline Don't go around your ass to reach your elbow... Posts: 7844 SW Washington State Gender:	Re: More cubes Reply #12 - 10/30/04 at 04:35:46 Need one like this... Not like this
Back to top	IP Logged

klx650sm2002 Serious Thumper Offline The more I learn the less I know. Posts: 2041 Cumbria,England Gender:	Re: More cubes Reply #13 - 10/30/04 at 09:17:39 [quote author=Greg_650 link=board=RubberSideDown;num=1096371374;start=0#12 date=10/30/04 at 04:35:46]Need one like this... Thats well horny. Clive W
Back to top	IP Logged

Savage_Greg Serious Thumper Alliance Member Offline Don't go around your ass to reach your elbow... Posts: 7844 SW Washington State Gender:	Re: More cubes Reply #14 - 10/31/04 at 03:41:07 It is right purdy, ain't it?
Back to top	IP Logged

Pages: 1 2 3

‹ Previous topic | Next topic ›

« Home