SuzukiSavage.com - Removed the white spacer, what else?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Removed the white spacer, what else?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 ... 6 7 8

Removed the white spacer, what else? (Read 70 times)

Savage_Greg

Serious Thumper
Alliance Member

Offline

Don't go around your
ass to reach your
elbow...

Posts: 7844
SW Washington State
Gender: male

Re: Removed the white spacer, what else?
Reply #105 - 11/14/04 at 03:19:03

Savage_Rob wrote on 12/31/69 at 16:00:11:

.....

Overall now, I have the DJ needle with the clip on the 4th notch and the white spacer installed - also using a Mikuni 155 main jet. I am using a K&N direct replacement air filter and a MAC muffler.

Now I just have to record the MAC.

AND the sound from your recording is great. The Mac sounds like a cross between the Trapp and Raask.

AND what I noticed (or didn't notice) in the sound clip was there wasn't any popping sound. So your combination of needle positions and main jet seems to be a good choice.

Way to go Popeye
8)

IP Logged

Savage_Rob

Serious Thumper
Alliance Member

Offline

Mechanically
Inclined Amateur

Posts: 6972
Texas (Dallas area)
Gender: male

Re: Removed the white spacer, what else?
Reply #106 - 11/14/04 at 16:32:54

Thanks Greg. She has no visible smoke now either; there was a small amount of black smoke when the clip was on the needle's 5th notch. I know these various settings are dependent upon the particular intake/exhaust combinations but I think I'm close to the right mix now. While I don't generally care for "trial and error" troubleshooting, I do enjoy the "tinker and test ride" method on my bike.

IP Logged

Pages: 1 ... 6 7 8

‹ Previous topic | Next topic ›

« Home