SuzukiSavage.com - Various and Sundry Tips and Tricks

Welcome, Guest. Please Login or Register :: View Members

(Moderators: verslagen1, Dave, Serowbot)

Pages: 1 ... 3 4 5

Various and Sundry Tips and Tricks (Read 3848 times)

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 29266 Tucson Az Gender:	Re: Tips and tricks.... Reply #60 - 02/24/11 at 22:51:31 Mr 650 wrote on 08/29/04 at 06:50:35: Righty tighty,Lefty loosey most of the time Like the little belt pulley is left hand thread. Naaa,... it's righty tighty too... ...
Back to top	Ludicrous Speed !... ... ... IP Logged

verslagen1

YaBB Moderator
ModSquad

Offline

Where there's a
will, I want to be
in it.

Posts: 28993
L.A. California
Gender: male

Re: Various and Sundry Tips and Tricks
Reply #61 - 08/25/20 at 07:39:45

zipidachimp wrote on 08/24/20 at 21:53:38:

Scrounging around the interwebs for a way to pull the old bearings from an E-bay cast front wheel and spending less than a mechanic charged me for the rear, I found a clever website that offered 2 ways to do it: $2 solution or a $4 solution. I chose to spend $2 !!
https://www.instructables.com/id/2-Motorcycle-Wheel-Bearing-Puller/

Richer people can spend$4 !
https://thumpertalk.com/forums/topic/1245941-diy-bearing-puller-for-under-1/
(prices in can$)
Worked like a friggin' charm!
cheers! Cool

IP Logged

buster6315 Senior Member Offline SuzukiSavage.com Rocks! Posts: 384	removing left handlebar grip Reply #62 - 09/15/21 at 08:33:36 Is there any tip on how to remove the left handle grip? I am going to install different handlebars. Thank you!
Back to top	IP Logged

Ruttly Serious Thumper Offline Thumpers Rule Posts: 5399 Manteca , CA Gender:	Re: Various and Sundry Tips and Tricks Reply #63 - 09/20/21 at 10:26:29 Slowly work a screwdriver between grip n bar spray some wd40 in there ,do the same in 4 or 5 spots ,remove screwdriver , twist n pull
Back to top	The Topic Terminator IP Logged

buster6315 Senior Member Offline SuzukiSavage.com Rocks! Posts: 384	Re: Various and Sundry Tips and Tricks Reply #64 - 02/12/22 at 07:53:55 I removed the chrome end cap, then I worked a stiff wire attached to my drill chuck in between the grip and the handlebar. Activate the drill and the wire will walk its way around the handlebar. Use pressure to force it in the full width of the grip. BAM!
Back to top	IP Logged

Pages: 1 ... 3 4 5

« Home