SuzukiSavage.com - hand made forward controls

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › hand made forward controls

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

hand made forward controls (Read 14 times)

Red_Wine Senior Member Offline Chain-drive, 400cc Black Savage in Chile Posts: 478 Santiago, Chile Gender:	Re: hand made forward controls Reply #15 - 05/10/05 at 10:01:32 bobo383 wrote on 12/31/69 at 16:00:05: Oh how right you are about the #7 stoppers - looks like it was made that way now. Thanks for the stick-on furniture pad/spacer tip as well - I couldn't find half-inchers but found 3/4" - work fine. MUCH MO BETTA! Pics please... don't leave us in the dark.... RW
Back to top	IP Logged

bobo383 Serious Thumper 2004 No Login Offline Neck=Red Posts: 516 Arlington, TX Gender:	Re: hand made forward controls Reply #16 - 05/10/05 at 20:28:48 OK, but sleepy right now. How about tomorrow...
Back to top	Arlington Texas Used to have 98 & 88 Savages IP Logged

reeko YaBB Newbies 2004 No Login Offline Posts: 26 Slovak Republic Gender:	Re: hand made forward controls Reply #17 - 05/13/05 at 07:37:02 sorry but I still don't have it maked.. as soon I'll have it I'll post a pictures
Back to top	Reeko 8) IP Logged

bobo383 Serious Thumper 2004 No Login Offline Neck=Red Posts: 516 Arlington, TX Gender:	Re: hand made forward controls Reply #18 - 05/19/05 at 19:03:37 Here's the #7 stoppers, drilled for the 6mm bolts: Pardon the old GS1000 in the background...
Back to top	Arlington Texas Used to have 98 & 88 Savages IP Logged

WD Serious Thumper 2005 No Login Offline Professional "scooter trash". Posts: 5207 Rosemark TN Gender:	Re: hand made forward controls Reply #19 - 05/19/05 at 23:15:23 No apology needed, the GS100 was an absolute street scorcher in it's day. We've got a few as parts bikes at work. -WD
Back to top	On 2 wheels since 7/87 Black and Chrome 2003 1950s style custom IP Logged

Savage_Greg

Serious Thumper
Alliance Member

Offline

Don't go around your
ass to reach your
elbow...

Posts: 7844
SW Washington State
Gender: male

Re: hand made forward controls
Reply #20 - 05/20/05 at 06:33:45

Here is an old photo of the seat bushings when I raised my seat. I used 1/4" thick rubber which I cut to match the size of the stock pieces. I put 2 round pieces (1/2") on the front and one rectangle piece on the rear (1/4") and glued them together with Weldwood contact cement. Once that cement dries they won't come apart....messy, but good stuff. That supported the pan on the frame pretty good.

IP Logged

Pages: 1 2

‹ Previous topic | Next topic ›

« Home