SuzukiSavage.com - best place to splice in tach and shielding

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › best place to splice in tach and shielding

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

best place to splice in tach and shielding (Read 8 times)

russ_g

Ex Member

best place to splice in tach and shielding
05/03/05 at 10:06:21

Morning all. I have 4 wires on the tach of which i only think I would need 3.

RED - igition on
BLUE - Lamp on
BLACK - ground
GREEN- negative terminal on coil

Do i really need the Blue? There are no lights to turn off or on on my Canadian Savage. Everything turns on when the key is turned on. Also is it best to attach green directly at the coil lead or can I splice into that wire anywhere. Someone mentioned something about having to shield this wire. Shield with what and how. Tach came with probably 24" of wire on it.

thanks

IP Logged

Savage_Greg

Serious Thumper
Alliance Member

Offline

Don't go around your
ass to reach your
elbow...

Posts: 7844
SW Washington State
Gender: male

Re: best place to splice in tach and shielding
Reply #1 - 05/03/05 at 10:19:46

russ_g wrote on 12/31/69 at 16:00:05:

Take a look on page 3 of the Topic "Paint". In one picture you can sorta see where to connect the Tach.

If you want the lamp in the tach to come on, you will need to connect the blue wire to a positive lead somewhere. If you connect the Red + Blue leads to the coil positive side, the black to ground anywhere, and the green to the coil negative you are done.

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home