Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Upper Fork diameter - Flyscreen owners
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
Upper Fork diameter - Flyscreen owners (Read 4 times)
PerrydaSavage
Serious Thumper
Alliance Member
Offline
Riding "The
Rock"!
Posts: 3522
Republic of Newfoundland
Gender:
Upper Fork diameter - Flyscreen owners
12/18/04 at 08:20:35
8)Got my new Nat. Cycle Flyscreen from e-bay yesterday ... sweet! Anyhoo, it comes with a variety of different thickness rubber gaskets to go between the fork mtg. brackets and the fork itself ... a little chart tells you which gaskets to select depending on the diameter of your forks ... Question; what is the diameter in millimeters of the upper fork legs of the Savage ... I don't have a micrometer, so I tried measuring with an adjustable wrench (to simulate a micrometer) and a tape measure ... got approx. 35mm? Is this right? The chart included with the Flyscreen gives different gasket selections for 33, 34.6 & 35mm.
Back to top
Before you diagnose yourself with depression or low self-esteem, first make sure you are not, in fact, just surrounded by arseholes!
IP Logged
Kropatchek
Serious Thumper
Offline
Why more than 1
cylinder?
Posts: 1457
Alphen a/d Rijn Netherlands
Gender:
Re: Upper Fork diameter - Flyscreen owners
Reply #1 -
12/18/04 at 08:44:12
Recall an earlier post . Diameter is 38 mm ( as measured with the micrometer)
Greetz
Kropatchek
Back to top
Never ask your bike to scream before her throat is warm.
'93 Sav in '96 ( yellow) looks
IP Logged
PerrydaSavage
Serious Thumper
Alliance Member
Offline
Riding "The
Rock"!
Posts: 3522
Republic of Newfoundland
Gender:
Re: Upper Fork diameter - Flyscreen owners
Reply #2 -
12/19/04 at 10:50:46
Thanks! 38mm it was! The proper gaskets for a 38mm dia. fork were supplied with the shield ... worked like a charm! Managed to install the Flyscreen this afternoon ... was a bit chilly working in my unheated shed (temp was -4deg C or approx. 27deg F), but installed the shield on with a minimum of cuss words!
Here's a pic of the installed shield;
Back to top
Before you diagnose yourself with depression or low self-esteem, first make sure you are not, in fact, just surrounded by arseholes!
IP Logged
Tony
Full Member
2004 No Login
Offline
Posts: 102
Saugerties, NY
Gender:
Re: Upper Fork diameter - Flyscreen owners
Reply #3 -
05/29/05 at 05:40:40
Does anyone know the diameter of the lower forks? I am contemplating adding a set of running "Fog" lights low on the forks as an added way to be seen.
Back to top
-Tony
......Remember;
Where ever you go,
there you are.
IP Logged
Michael
Ex Member
Re: Upper Fork diameter - Flyscreen owners
Reply #4 -
05/29/05 at 17:04:27
PerrydaSavage wrote
on 12/31/69 at 16:00:12:
was a bit chilly working in my unheated shed (temp was -4deg C or approx. 27deg F),
Geesh perry.....Didn't know it was still going below zero there....we are having daytime highs of about 15-20, and nightime lows of about 8-10 in New Brunswick. but the friggin rain won't stop....3 full sunny days all may.
cheers
Michael
Back to top
IP Logged
Kropatchek
Serious Thumper
Offline
Why more than 1
cylinder?
Posts: 1457
Alphen a/d Rijn Netherlands
Gender:
Re: Upper Fork diameter - Flyscreen owners
Reply #5 -
05/30/05 at 05:51:40
Tony wrote
on 12/31/69 at 16:00:05:
Does anyone know the diameter of the lower forks? I am contemplating adding a set of running "Fog" lights low on the forks as an added way to be seen.
Upper end of the lower tubes 57.88 mmm (2.2785")
Lower portion 49.06 (1.9315")
Oh, I love those digital, switchable ( mm to inch) vernier calipers, everybody should have one.
Greetz
Kropatchek
Back to top
Never ask your bike to scream before her throat is warm.
'93 Sav in '96 ( yellow) looks
IP Logged
LANCER
Serious Thumper
Alliance Member
Offline
Savage Beast
Performance Parts
Posts: 10803
Oklahoma
Gender:
Re: Upper Fork diameter - Flyscreen owners
Reply #6 -
05/30/05 at 09:48:14
They are fun, aren't they?
Back to top
IP Logged
PerrydaSavage
Serious Thumper
Alliance Member
Offline
Riding "The
Rock"!
Posts: 3522
Republic of Newfoundland
Gender:
Re: Upper Fork diameter - Flyscreen owners
Reply #7 -
05/31/05 at 00:33:14
Quote:
Geesh perry.....Didn't know it was still going below zero there....we are having daytime highs of about 15-20, and nightime lows of about 8-10 in New Brunswick. but the friggin rain won't stop....3 full sunny days all may
Hi Michael ... ahhhh, it was -4C (27F) when I installed my shield on Dec. 19th
last year
(note post date
)
All same bud ... we're having a rather cool, wet Spring here in eastern Nfld. ... daytime highs of about 10C, nitetime lows around 2-4C ... certainly less than ideal Ridin' weather ...
Back to top
Before you diagnose yourself with depression or low self-esteem, first make sure you are not, in fact, just surrounded by arseholes!
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
05/16/25 at 21:34:19
›
General Category
›
Rubber Side Down!
› Upper Fork diameter - Flyscreen owners
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.