Hi all! After finally getting my 96 running, I ran into a problem getting it to idle. While I was rebuilding the top end, I did the carb mods as follows:

1. White spacer to 1/2 height.

2. Replaced Main Jet with #155.

3. Turned Idle mixture 2 turns out.

I also replaced stock exhaust with a Mac. In my attempt to adjust  the idle, there is gas coming out the back of the pod filter onto the battery case. It also is coming out of the leftside vent tube (a little), and it seems to want to idle as long as the choke is out. My guess is the float or float needle is hanging up. Anyone ever experience this type of problem?

Thanks,

Brian