SuzukiSavage.com - Need Torque spec help

Welcome, Guest. Please Login or Register :: View Members

(Moderators: verslagen1, Dave, Serowbot)

Pages: 1

Need Torque spec help (Read 0 times)

realdeal Junior Member Offline Thumpity, thumpity, thump... Posts: 55	Need Torque spec help 10/18/05 at 12:32:31 Anyone know what the torque specs. are of all of these bolts? Are they all the same spec, or are some supposed to be snugged tighter than others? Thanks!
Back to top	IP Logged

torque Serious Thumper 2005 No Login Offline 2008 nightster,flat od green and black Posts: 748 rock hill,S.C. Gender:	Re: Need Torque spec help Reply #1 - 10/18/05 at 15:11:33 they are all 8.5 ft lbs
Back to top	IP Logged

Reelthing

Serious Thumper
Alliance Member

Offline

Fish or ride that is
the question

Posts: 5397
Houston,Tx
Gender: male

Re: Need Torque spec help
Reply #2 - 10/18/05 at 20:15:34

realdeal wrote on 12/31/69 at 16:00:10:

Anyone know what the torque specs. are of all of these bolts? Are they all the same spec, or are some supposed to be snugged tighter than others?

http://suzukisavage.com/images/uploaded/HeadCovSeal01web.jpg

Thanks!

6 to 8 lbs but I'd bet 5lbs would do - it doesn't take much - I use small stuff 1/4 in drive and a 3 inch 10mm boxend - be sure your at tdcc

IP Logged

Savage_Rob Serious Thumper Alliance Member Offline Mechanically Inclined Amateur Posts: 6972 Texas (Dallas area) Gender:	Re: Need Torque spec help Reply #3 - 10/19/05 at 05:18:27 And I had a couple I had to approximate because I couldn't get my torque wrench on it.
Back to top	1998\|MAC muffler\|ceramic coated header\|K&N air filter\|Amal Mk2 carb\|Odyssey battery\|iridium plug\|NC windshield\|Dunlop 491s\|Superbrace\|EBC brake rotor\|12.5" Progressive shocks\|Kuryakyn ISO grips IP Logged

Pages: 1

« Home