I've always loved yellow and if I get my dark blue savage done, I think that's what it will be.  I think it reminds me of my first love - a yellow cb400F with that nice, flowing, 4 into 1 exhaust in 1975!  Funny, I just saw a pic of the same bike and it didn't really do anything for  me! ???

Simply incredible!  I wonder how they do that?

all i have is a 20 gallon air compressor,siphon feed spray gun,detail gun,and thats it.

after u get the old paint off (i sand blasted it),bondo any dents,then primer it, three coats should do it,then sand that down,then spray your base coat ,four coats is good,then sand that,then spray three or four coats of clear.

u use 200 grit sandpaper for the primer,and use 2000,yes 2000 grit for base coat,and for the clear coat use both sandpaper(2000 grit),and rubbing compound.

be sure u let the bondo set at least 24 hours because it will shrink,and let off some air pockets.

yeah i did mine rattle can last time and the gas eats through it ,killed the whole paint job. u need some thing with hardener in it.

Hey I found out that if u mix urea (45-46% nitrogen) with water and follow these steps off this webpage u can do the same thing.   Im sure it would be alot cheaper than 80 a quart.

I just need to find me some urea fertilizer and do some practicing.

http://www.airbrush.com/how-to-guide.aspx?content=how-to/howtoDetail&id=96