SuzukiSavage.com - Can I make my own heat sheild?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Can I make my own heat sheild?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Can I make my own heat sheild? (Read 1 times)

Weez

Ex Member

Can I make my own heat sheild?
10/29/05 at 18:38:49

Hey all,

My other post doesnt seem to be working.

i got my bike back today and I need a new heat sheild due to my new muffler.

The extension is about 6 inches so i want a sheild like 8' to cover the weld.

I want to just take a pipe bigger than the extension pipe, cut it and half, have it chromed at a local chroming place and put some clamps on it.

Do y'all think it'll work?

Thanks

Weez

IP Logged

Reelthing Serious Thumper Alliance Member Offline Fish or ride that is the question Posts: 5397 Houston,Tx Gender:	Re: Can I make my own heat sheild? Reply #1 - 10/29/05 at 19:35:41 I've seen 8 inch heat shields from Cobra I think - if you can buy one that works or one that's too long and cut it off liable to be far cheaper unless you know some one that will do a chrome plate for you
Back to top	IP Logged

Savage_Greg Serious Thumper Alliance Member Offline Don't go around your ass to reach your elbow... Posts: 7844 SW Washington State Gender:	Re: Can I make my own heat sheild? Reply #2 - 10/30/05 at 05:54:43 Spend $20, and save the hassle. Buy one from J&P cycles.
Back to top	IP Logged

klx650sm2002 Serious Thumper Offline The more I learn the less I know. Posts: 2041 Cumbria,England Gender:	Re: Can I make my own heat sheild? Reply #3 - 10/30/05 at 08:33:39 I made a heat shield to fit KLX's header as it passes the carb. It's aluminium so is easy to form and polishes up nicely. Clive W
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home