Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› muff opinions
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages:
1
2
muff opinions (Read 10 times)
russ_g
Ex Member
muff opinions
04/07/06 at 17:11:39
Ok, IMHO the stock muffler just doesn't look or sound the greatest. However, I also don't want my bike to be too loud. Any middle of the road here?
Back to top
IP Logged
Savage Librarian
Serious Thumper
Offline
One Hoopy Frood
Posts: 524
Houston area
Gender:
Re: muff opinions
Reply #1 -
04/07/06 at 17:19:17
I'd recommend going with a sportster muffler. Easy to put on, enough volume to hear yourself without irritating the neighbors, and about as inexpensive as you're going to get, methinks. Louder than stock, but not so loud as any of the others, from what I hear.
Back to top
Life is not a journey to the grave with the intention of arriving safely, in one pretty and well preserved piece, but to skid in broadside, used-up, worn out, and defiantly shouting 'Geronimo!!!'
IP Logged
russ_g
Ex Member
Re: muff opinions
Reply #2 -
04/07/06 at 17:26:16
Thanks much - so if one were to look for a Sportster muffler? Is there a standard part number? Anything else required to install this? Forgive my stupidity.
Back to top
IP Logged
Steve530
Senior Member
2005 No Login
Offline
Posts: 452
Knoxville, TN
Gender:
Re: muff opinions
Reply #3 -
04/07/06 at 18:31:03
russ_g,
I went to a local harley dealer and browsed through their used mufflers. I found a nice used muffler from a Dyna for $20. It has a different bracket than the Sportster muffler that was easier to mount, but I had to have a short exhaust pipe extension made at a muffler shop.
I think you need to buy a Sportster or Dyna muffler made for a bike before 2004. The newer mufflers have a small crossover that you would have to plug, so don't get one of those.
Steve
Back to top
'97 Black / 1/2 white spacer
155 main jet / 55 pilot jet / Dyna muffler
snorkel removed / K&N drop in / seat raised
Slipstreamer SS30 windshield
IP Logged
Savage_Rob
Serious Thumper
Alliance Member
Offline
Mechanically
Inclined Amateur
Posts: 6972
Texas (Dallas area)
Gender:
Re: muff opinions
Reply #4 -
04/07/06 at 22:58:57
Oh, mufflers! I just had to see what this topic was about.
Back to top
1998|MAC muffler|ceramic coated header|K&N air filter|Amal Mk2 carb|Odyssey battery|iridium plug|NC windshield|Dunlop 491s|Superbrace|EBC brake rotor|12.5" Progressive shocks|Kuryakyn ISO grips
IP Logged
LANCER
Serious Thumper
Alliance Member
Offline
Savage Beast
Performance Parts
Posts: 10875
Oklahoma
Gender:
Re: muff opinions
Reply #5 -
04/08/06 at 03:53:32
Savage_Rob wrote
on 12/31/69 at 16:00:04:
Oh, mufflers! I just had to see what this topic was about.
I think you need to go back behind the dumpster for a while
Back to top
IP Logged
chriss
Guest
Re: muff opinions
Reply #6 -
04/08/06 at 04:09:42
Russ, check out the Supertrapp muffler. Expensive, but its a deep rumble, much like a Harley. Seriously! Big increase in power too!. It has disks that you add and remove to change sound and performance. Dont forget to get a K@N air filter also if you get a less restrictive muffler.
Back to top
IP Logged
Reelthing
Serious Thumper
Alliance Member
Offline
Fish or ride that is
the question
Posts: 5397
Houston,Tx
Gender:
Re: muff opinions
Reply #7 -
04/08/06 at 05:32:13
LANCER wrote
on 12/31/69 at 16:00:04:
I think you need to go back behind the dumpster for a while
must be the pills
Back to top
IP Logged
ruffhunter
Guest
Re: muff opinions
Reply #8 -
04/08/06 at 15:07:01
I've been browsing at Cycle Shack's mufflers. They have a turn out muffy that I like and appears to be the same exhaust in their Universal Fit section marked MTO-134. 1 3/4 hook up with a 2 inch overall diameter. Jcwhitney has a similar universal slip on but only in 27 and 3? inch offerings. I'll have to measure the length when I pick my new S40 up.
Back to top
IP Logged
thumperclone
Serious Thumper
Alliance Member
Offline
PGR rider riding
with respect
Posts: 7280
Grand Junction Colorado
Gender:
Re: muff opinions
Reply #9 -
04/12/06 at 07:46:30
had that turn out from jcw WAY too loud no baffle packing non removable steel baffel..e bay got hd muff for $15 plus shipping the 90s model has a better bracket still need the adapter from your local muff shop some free some 5 bucks.. i drilled out the disk with a 1/4 in bit just the rite sound for my taste.. got an 80s model(tab style) with a nickle size hole in the disk...yours if you pay shipp...
Back to top
standing for those who stood for US
IP Logged
cigaro
Ex Member
Re: muff opinions
Reply #10 -
04/12/06 at 12:09:33
Okay one more time. For my Sportster muff conversion I need a muffler shop to craft a 7 inch extension that goes from what to what? Mean what size at one end and the other?
Back to top
IP Logged
ruffhunter
Guest
Re: muff opinions
Reply #11 -
04/12/06 at 12:47:58
Thanks for the input of the Jc thumperclone, I'll avoid it.
Back to top
IP Logged
pgolden
Ex Member
Re: muff opinions
Reply #12 -
04/12/06 at 13:02:09
Go to my page on bikepics.com (link below), print a picture of my adapter, take your header pipe and sportster muffler to the muffler shop, tell the mechanic you need a 10 degree bend in the middle of the adapter.
Back to top
IP Logged
azjay
Serious Thumper
Offline
aridzona...
its a
dry heat
Posts: 816
Gender:
Re: muff opinions
Reply #13 -
04/13/06 at 07:17:37
i have a 17" straight thru, sportster muffler on my wife's bike, the harley bracket, matched up with the suzuki mount perfectly, i used a harley muffler clamp, and the suzuki heat shields. i like loud pipes, and i think it sounds exactly as it should, you can hear it 1/2 mile away but not 1 mile.
Back to top
dyna muff,1/2 spacer,152.5,55,drilled air box,idle mix,spark plug door,harley bars & seat,spitfire windshield,turn signal,dunlops,man.pethingy,ISO pegs,engine cage,hiway pegs,support 81
IP Logged
thumperclone
Serious Thumper
Alliance Member
Offline
PGR rider riding
with respect
Posts: 7280
Grand Junction Colorado
Gender:
Re: muff opinions
Reply #14 -
04/13/06 at 07:23:58
cigaro wrote
on 12/31/69 at 16:00:04:
Okay one more time. For my Sportster muff conversion I need a muffler shop to craft a 7 inch extension that goes from what to what? Mean what size at one end and the other?
(from front to back)its a piece of 1 3/4 tail pipe one end is flared to fit over end of head pipe then 10 degree bend (to kick muff out away from back brake lever and cable) then lightly sand outside rim of other end and cram it in the hd muff..
Back to top
standing for those who stood for US
IP Logged
Pages:
1
2
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
12/21/25 at 10:23:59
›
General Category
›
Rubber Side Down!
› muff opinions
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.