Donate!
Welcome, Guest. Please Login or Register :: View Members
SuzukiSavage.com › General Category › Rubber Side Down! › Header bolt torque setting?
(Moderators: verslagen1, Dave, Serowbot) ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Header bolt torque setting? (Read 4 times)
Guido
Ex Member
Header bolt torque setting?
08/06/06 at 16:56:29  
Does anyone know what the correct torque setting is for the header pipe bolts where it attaches to the head? I looked at the list in tech section and I'm unsure which one it is. HELP!! Grin
Back to top
 
 
  IP Logged
Guido
Ex Member
Re: Header bolt torque setting?
Reply #1 - 08/06/06 at 17:21:25  
Is it the one that states "exhaust pipe clamp bolts"?
Back to top
 
 
  IP Logged
rokrover
Full Member
2005 No Login
***
Offline

torkenstein

Posts: 147
SoCal
Re: Header bolt torque setting?
Reply #2 - 08/06/06 at 18:20:07  
13 - 20 ft.lb.  It's not so critical as these need to be snugged up every once in a while as the gasket compresses with heat cycling.  Make sure there is some sort of anti-sieze grease (e.g. moly) on the threads.
Back to top
 
 
  IP Logged
Guido
Ex Member
Re: Header bolt torque setting?
Reply #3 - 08/06/06 at 19:05:14  
thanks, I'll give it a shot!
Back to top
 
 
  IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›


« Home

 
« Home
SuzukiSavage.com
12/22/25 at 05:34:12



› General Category › Rubber Side Down! › Header bolt torque setting?


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.