SuzukiSavage.com - engine rebuild

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › engine rebuild

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

engine rebuild (Read 5 times)

mekyjesy

Ex Member

engine rebuild
08/18/06 at 09:09:46

I was wondering, I am in need of a new engine for my 95 Savage being that my piston exploded! First of all, does anyone have a spare 650 engine to sell? Next, the inside of the cylinder isn't too awful scored. Where can I get an oversized piston to fit it if I bore it out? The valves are kinda beat, but they might work. My hope is to find a used engine to put in there to save all the time, but I believe that can get very expensive.

Thanks.

IP Logged

vroom1776 Serious Thumper Offline Posts: 2110 Gender:	Re: engine rebuild Reply #1 - 08/18/06 at 09:41:08 Junk yard! and ebay! Wiseco makes oversized pistons. You can also send out the cyl to Boretech, have it rebored, and ceramic coated. Lancer has done this, so look for some of his old posts ont he subject. May also consider a cam regrind. Should be able to get valves, ect. from Bikebandit.com or ronayers.com, or you local dealership. V
Back to top	IP Logged

Bugscraper Full Member 2004 No Login Offline I love YaBB 1G - SP1! Posts: 130 Gender:	Re: engine rebuild Reply #2 - 08/18/06 at 12:04:58 mekyjesy wrote on 12/31/69 at 16:00:08: my piston exploded! Could you elaborate on this?
Back to top	IP Logged

Keith_B Ex Member	Re: engine rebuild Reply #3 - 08/18/06 at 12:46:53 if you need a cylinder, i have one you can get for $50.00 + shipping.
Back to top	IP Logged

torque Serious Thumper 2005 No Login Offline 2008 nightster,flat od green and black Posts: 748 rock hill,S.C. Gender:	Re: engine rebuild Reply #4 - 08/18/06 at 14:55:44 when my connecting rod went through the case i estimated around 2,500$ to rebuild it,so i sold it to lancer for parts.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home