SuzukiSavage.com - Bar ends

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Bar ends

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Bar ends (Read 4 times)

steelwolf Serious Thumper Offline "I'm a cowboy, on a steel horse I ride." Posts: 847 Trinity, NC Gender:	Bar ends 08/19/06 at 15:47:04 Any ideas on how to attach the bar ends? I though maybe super glue but then if I need to get them off I may be facing another problem all together.
Back to top	IP Logged

Serowbot YaBB Moderator ModSquad Online OK.... so what's the speed of dark? Posts: 29686 Tucson Az Gender:	Re: Bar ends Reply #1 - 08/19/06 at 16:13:55 The ones I've had in the past have a rubber compression plug that tightens inside the bar via hex screw on the end. Oops! Maybe you meant the stockers. If they are loose just wedge some tape in the hole and shove.
Back to top	Ludicrous Speed !... ... ... IP Logged

SavageDude Serious Thumper Alliance Member Offline Posts: 561 OC_California Gender:	Re: Bar ends Reply #2 - 08/19/06 at 18:02:18 How about hot glue gun?
Back to top	2005 S40, debadged, Tkat FB, saddle bags, sissy bar, HD Sporter muff, Fly screen, white spacer mod, 150 main jet.....and sssslowly upgrading IP Logged

azjay Serious Thumper Offline aridzona... its a dry heat Posts: 816 Gender:	Re: Bar ends Reply #3 - 08/20/06 at 08:26:17 if you glue the end of the bar, how would you refill the stein? ???
Back to top	dyna muff,1/2 spacer,152.5,55,drilled air box,idle mix,spark plug door,harley bars & seat,spitfire windshield,turn signal,dunlops,man.pethingy,ISO pegs,engine cage,hiway pegs,support 81 IP Logged

steelwolf Serious Thumper Offline "I'm a cowboy, on a steel horse I ride." Posts: 847 Trinity, NC Gender:	Re: Bar ends Reply #4 - 08/20/06 at 11:38:34 The hot glue worked great, thanks. As for the stein, I left a hole for a funnel.
Back to top	IP Logged

steelwolf Serious Thumper Offline "I'm a cowboy, on a steel horse I ride." Posts: 847 Trinity, NC Gender:	Re: Bar ends Reply #5 - 08/20/06 at 19:52:00 Hot glue just give it up after about 50 miles. Guess I'll just use the super glue and then fight them off later if need be.
Back to top	IP Logged

clueless-FSO Senior Member Offline Posts: 454 Birmingham, Al Gender:	Re: Bar ends Reply #6 - 08/20/06 at 20:17:02 Removed mine when I changed bars. Lost one a couple of days later. ordered new ones. They had ridges on them and I had to hammer them in. Knowing what i do now, I'd use silicon sealer if I was putting old ones back. Immune to vibration. My .02
Back to top	'96 Black "bed liner" paint.. Ed_L forward controls, HD bars with 1"socket risers, 155 main, pod filter, HD exhaust, punched baffle, modded seat, chain drive conversion, slavy mod one of a kind IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home