SuzukiSavage.com - bobbed beltguard

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › bobbed beltguard

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

bobbed beltguard (Read 10 times)

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 29685 Tucson Az Gender:	bobbed beltguard 08/20/06 at 13:42:07 Never liked the way the guard curved at the end, so I cut it off. First time trying to embed pic's, hope this works!
Back to top	Ludicrous Speed !... ... ... IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 29685 Tucson Az Gender:	Re: bobbed beltguard Reply #1 - 08/20/06 at 13:45:54 Anybody know why these pic's are so fuzzy? Original size was 120k, posting size came out 5k.
Back to top	Ludicrous Speed !... ... ... IP Logged

911radioman

Ex Member

Re: bobbed beltguard
Reply #2 - 08/20/06 at 15:46:49

The pics are probably fuzzy because their original resolution was smaller than what you've tried to make them here.

I use a little plug-in from Microsoft that lets me right click on the pic I want and it will resize it. I usually resize mine down to a "medium" setting, 800x600 screen rated and it works real well for posting on these message boards.

Oh, I like the bobbed belt guard. I'm not much on bobbed bikes, but I do like the belt guard! 8)

IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 29685 Tucson Az Gender:	Re: bobbed beltguard Reply #3 - 08/20/06 at 16:21:10 Fixed it! I was posting the thumbnail address. Duh...
Back to top	Ludicrous Speed !... ... ... IP Logged

911radioman Ex Member	Re: bobbed beltguard Reply #4 - 08/20/06 at 16:26:46 What did you use to cut the guard down?
Back to top	IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 29685 Tucson Az Gender:	Re: bobbed beltguard Reply #5 - 08/20/06 at 16:44:07 Hacksaw, then a bench grinder and wire wheel to smooth it. I put a touch of flat black paint on the edge to prevent rust. Took less than an hour total, and it's easier to install now without the big curve on the end.
Back to top	Ludicrous Speed !... ... ... IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10875 Oklahoma Gender:	Re: bobbed beltguard Reply #6 - 08/20/06 at 17:26:04 I like it!
Back to top	IP Logged

enophile Full Member Offline 1998 Savage, black, mostly stock Posts: 116 Morgantown, WV Gender:	Re: bobbed beltguard Reply #7 - 08/20/06 at 17:30:11 I really like it. It is something I wouldn't have thought of doing and I'm glad you included the pics.
Back to top	The number of cylinders isn't important...it's how you use them. IP Logged

Paladin. Serious Thumper Offline Hamster Posts: 4929 Sunny Southern California Gender:	Re: bobbed beltguard Reply #8 - 08/20/06 at 17:53:15 Yours looks so good I had to go check on stock. You are 100% correct on this. It looks right, the stock guard looks like it belongs on a Kawasaki Drifter.
Back to top	IP Logged

steelwolf Serious Thumper Offline "I'm a cowboy, on a steel horse I ride." Posts: 847 Trinity, NC Gender:	Re: bobbed beltguard Reply #9 - 08/20/06 at 19:45:56 Heck of a job there serowbot. Really cleaned up the end of that atrocious (spelling?) chrome mammoth. Still too much of it there for me but it looks really good. Now that you know you can do a fine job cutting and grinding, it's time to start on that fender.
Back to top	IP Logged

vroom1776 Serious Thumper Offline Posts: 2110 Gender:	Re: bobbed beltguard Reply #10 - 08/21/06 at 08:57:59 nice work!
Back to top	IP Logged

PA KID Ex Member	Re: bobbed beltguard Reply #11 - 08/21/06 at 15:58:51 Hope you won't mind if some of us copy.I LIKE IT
Back to top	IP Logged

Serowbot YaBB Moderator ModSquad Offline OK.... so what's the speed of dark? Posts: 29685 Tucson Az Gender:	Re: bobbed beltguard Reply #12 - 08/21/06 at 18:02:16 Wan'na copy it? I'm honored. Feel free! I measured the piece I cut off at 4 1/8" if that is of any help to you all. You can see it on the ground in the third picture. Have fun!
Back to top	Ludicrous Speed !... ... ... IP Logged

Brewbrother Serious Thumper Offline Just lending a helping hand. Posts: 953 Gender:	Re: bobbed beltguard Reply #13 - 08/21/06 at 18:12:19 I like that, I'll try it when I'm able.
Back to top	Opportunities multiply as they are seized. No spacer,60 pilot jet, 155 main jet, plug door, sportster muffler, k&n drop in, iridium plug, brake pedal mod,de-badged, Dunlops, bullet turn signals. IP Logged

Brewbrother Serious Thumper Offline Just lending a helping hand. Posts: 953 Gender:	Re: bobbed beltguard Reply #14 - 08/21/06 at 18:17:09 nice work. I'm considering this. When will you get new tires??
Back to top	Opportunities multiply as they are seized. No spacer,60 pilot jet, 155 main jet, plug door, sportster muffler, k&n drop in, iridium plug, brake pedal mod,de-badged, Dunlops, bullet turn signals. IP Logged

Pages: 1 2

‹ Previous topic | Next topic ›

« Home