SuzukiSavage.com - Jetting Carb

Grove_Tucky_650 Full Member Offline Posts: 112 Ohio - Grove City Gender:	Re: Jetting Carb Reply #15 - 03/17/07 at 19:20:20 Has anyone made their own custom pipes?
Back to top	IP Logged

klx650sm2002 Serious Thumper Offline The more I learn the less I know. Posts: 2041 Cumbria,England Gender:	Re: Jetting Carb Reply #16 - 03/18/07 at 03:25:50 Two, this on my KLX And this on my SR Clive W
Back to top	IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10875 Oklahoma Gender:	Re: Jetting Carb Reply #17 - 03/18/07 at 04:03:51 Grove_Tucky_650 wrote on 12/31/69 at 16:00:03: Has anyone made their own custom pipes? This is not as pretty as the one's KLX has done, but it is mine. I made the header out of 1.75" OD pipe and grafted on the core from a R&D muffler unit from Revolution Air co. I had this setup for a while but went back to the one above.
Back to top	IP Logged

Grove_Tucky_650 Full Member Offline Posts: 112 Ohio - Grove City Gender:	Re: Jetting Carb Reply #18 - 03/18/07 at 08:13:20 Lancer is that exhaust wrap? If so where did you get it?
Back to top	IP Logged

klx650sm2002 Serious Thumper Offline The more I learn the less I know. Posts: 2041 Cumbria,England Gender:	Re: Jetting Carb Reply #19 - 03/19/07 at 07:00:53 [/quote] I like the one above best. Clive W
Back to top	IP Logged

LANCER

Serious Thumper
Alliance Member

Offline

Savage Beast
Performance Parts

Posts: 10875
Oklahoma
Gender: male

Re: Jetting Carb
Reply #20 - 03/19/07 at 08:20:13

Hut, I got that particular wrap from an ebay ad and as it turned out the guy way in my local area. It was enough to do several pipes of this size.
I have some left over if you want it.
I just checked it and it will cover the header from the top on down to the bottom bend, but is not long enough to cover the last 6" at the bottom, just before the muffler attachment. The bottom portion could be covered by a heat shield.
Since it is a bit short, $10 will cover the wrap and shipping both.

KLX .... I am not surprised that you like that one.

Back to top

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 29042 L.A. California Gender:	Re: Jetting Carb Reply #21 - 03/19/07 at 10:40:31 How much wrap does it take?
Back to top	Versey's Place Tech Section Index IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10875 Oklahoma Gender:	Re: Jetting Carb Reply #22 - 03/19/07 at 11:13:04 verslagen1 wrote on 12/31/69 at 16:00:03: How much wrap does it take? The roll was 50' to start and I did my header and someone did another. There is 9.5' left over, so the previous wraps used 20' each. The overlap was obviously greater on those. trying to use the leftover may not look so good afterall.
Back to top	IP Logged

Grove_Tucky_650

Full Member

Offline

Posts: 112
Ohio - Grove City
Gender: male

Re: Jetting Carb
Reply #23 - 03/19/07 at 11:22:24

Looks like this is getting off topic Tongue

I do have some questions about a sportser muffler. I will make a new topic for that.

Back to the carb.... Doe anyone have a pic of what the pilot Jet looks like. I want to order one but I guess there are a couple different types. You can email it to me at tracy at theworldsweb.com

Thanks

Tracy (Male) Roll Eyes

Back to top

IP Logged

jd06s40 Full Member Offline live to ride Posts: 121 marion ohio Gender:	Re: Jetting Carb Reply #24 - 03/19/07 at 12:53:24 me to at jd_calbert@yahoo.com
Back to top	06 s40 se muffler,152.5 mainjet,55pilot,whitespacer mod,suzuki windscreen,gel seat,sissybar more to come IP Logged

Savage_Greg Serious Thumper Alliance Member Offline Don't go around your ass to reach your elbow... Posts: 7844 SW Washington State Gender:	Re: Jetting Carb Reply #25 - 03/21/07 at 10:39:30 Grove_Tucky_650 wrote on 12/31/69 at 16:00:03: Oh here is a pic not that anyone cares Here is a link to the original pic also. Looks like the file was to large to show up good I care, because you have the best looking tank design of them all...and it's green just like mine and Paladin's. The Y2K Savages were the best ones
Back to top	IP Logged

Grove_Tucky_650 Full Member Offline Posts: 112 Ohio - Grove City Gender:	Re: Jetting Carb Reply #26 - 03/21/07 at 16:22:12 Hey Greg is that white strip paint? I have not looked at it real close.
Back to top	IP Logged

Savage_Greg

Serious Thumper
Alliance Member

Offline

Don't go around your
ass to reach your
elbow...

Posts: 7844
SW Washington State
Gender: male

Re: Jetting Carb
Reply #27 - 03/22/07 at 08:59:53

Grove_Tucky_650 wrote on 12/31/69 at 16:00:03:

Looks like this is getting off topic Tongue

I do have some questions about a sportser muffler. I will make a new topic for that.

Back to the carb.... Doe anyone have a pic of what the pilot Jet looks like. I want to order one but I guess there are a couple different types. You can email it to me at tracy at theworldsweb.com

Thanks

Tracy (Male) Roll Eyes

Pilot Jets are on the outside ends..

Back to top

IP Logged

Grove_Tucky_650 Full Member Offline Posts: 112 Ohio - Grove City Gender:	Re: Jetting Carb Reply #28 - 03/22/07 at 09:54:15 Savage_Greg wrote on 12/31/69 at 16:00:03: Pilot Jets are on the outside ends.. http://i21.photobucket.com/albums/b277/gmdinusa/GMDLogo_1839.jpg Cool. It looks like those are different. What one is on our bike Greg?
Back to top	IP Logged

Savage_Rob Serious Thumper Alliance Member Offline Mechanically Inclined Amateur Posts: 6972 Texas (Dallas area) Gender:	Re: Jetting Carb Reply #29 - 03/22/07 at 12:15:58 Grove_Tucky_650 wrote on 12/31/69 at 16:00:03: Cool. It looks like those are different. What one is on our bike Greg? I don't remember but I know you can use either one. I think the stock pilot jet is normally the one without the holes in the sides.
Back to top	1998\|MAC muffler\|ceramic coated header\|K&N air filter\|Amal Mk2 carb\|Odyssey battery\|iridium plug\|NC windshield\|Dunlop 491s\|Superbrace\|EBC brake rotor\|12.5" Progressive shocks\|Kuryakyn ISO grips IP Logged